Weight distribution kits can be built to fit your needs, please contact your local U-Haul hitch center for pricing and availability.
Remorquage de charges lourdes Distribution du poids
Attache de remorque de distribution de poids à barre ronde Curt de 1000 lb
Ce produit n’est actuellement pas disponible.
Attache de remorque de distribution de poids à barre ronde Curt de 1000 lb
Ce produit n’est actuellement pas disponible.
Description
Description du produit
- Numéro de produit :
- CMF17002
Attache de remorque de distribution de poids à barre ronde, poids total 1 000, poids brut de remorque 10 000
- Barres à ressort en acier forgé arrondies
- Tête moulée ajustable et robuste
- Égalise le contrôle d'amélioration des charges
- Pattes de contrôle du balancement intégrées
- La clavette de 12 po est compatible avec les ouvertures de tube de receveur de 2 po x 2 po
- Inclut une tige ajustable de 2 po x 2 po, des barres à ressort, une tête ajustable, des fixations à crochets, une chaîne et une bride centrale pour barre à ressort, clavettes et goupille
- N'inclut pas de boule d'attache de remorque.
- Pour plus de renseignements, consultez le fichier PDF ci-dessous.
Évaluations (0)
Questions et réponses (6)
Questions et réponses (6)
Description du produit
- Numéro de produit :
- CMF17002
Attache de remorque de distribution de poids à barre ronde, poids total 1 000, poids brut de remorque 10 000
- Barres à ressort en acier forgé arrondies
- Tête moulée ajustable et robuste
- Égalise le contrôle d'amélioration des charges
- Pattes de contrôle du balancement intégrées
- La clavette de 12 po est compatible avec les ouvertures de tube de receveur de 2 po x 2 po
- Inclut une tige ajustable de 2 po x 2 po, des barres à ressort, une tête ajustable, des fixations à crochets, une chaîne et une bride centrale pour barre à ressort, clavettes et goupille
- N'inclut pas de boule d'attache de remorque.
- Pour plus de renseignements, consultez le fichier PDF ci-dessous.
Questions et réponses (6)
was chating w/ caroline got disconnected, wanted max adjustment height for CM 17000 w/d hitch
Hey Bill, see below for the shank details of the CMF17002:
Height 7-1/2"
Rise 5-1/2"
Drop 7-1/2"
Length 12"
can I pull any car ?
"The CMF17002 is a weight distribution system designed for towing trailers weighing up to 10 000 lbs. Pulling or towing a vehicle would require either an auto transport trailer, a two wheel tow dolly, or a tow bar system. Please visit your local U-Haul center for more information on a towing system that will work best for you."
What is proper adjustment fiction sway bars
"A friction sway control is pre-set at the factory with a tension suitable for most light trailers. To get maximum benefits from a friction sway control, a series of tests should be taken with the loaded trailer. During the first road test, try the sway control at the factory preset tension. On subsequent trips, increase or decrease tension by turning the adjustment bolt in 1/4 turn increments until the desired control is achieved. When towing during slippery conditions such as wet, icy or snow covered roads or on loose gravel, turn the on/off handle counterclockwise until all tension is removed from the unit. Failure to do so could prevent tow vehicle and trailer from turning properly."
Can this be put on a 1998 camero
Our hitch pro writes: "The Camaro hitches are class one 1-1/4" receivers and will not accept weight distribution hitches."
Does uhaul install weight distrubution bars
Our hitch pro writes: U-Haul sells and installs complete towing packages including weight distribution hitches. For complete pricing, please contact your local U-Haul center.
Does Curt make a WD set up with a #17124 adj shank or can one be substituted for the one that comes with the set up before ordering?
Weight distribution kits can be built to fit your needs, please contact your local U-Haul hitch center for pricing and availability.
was chating w/ caroline got disconnected, wanted max adjustment height for CM 17000 w/d hitch
Hey Bill, see below for the shank details of the CMF17002:
Height 7-1/2"
Rise 5-1/2"
Drop 7-1/2"
Length 12"
can I pull any car ?
"The CMF17002 is a weight distribution system designed for towing trailers weighing up to 10 000 lbs. Pulling or towing a vehicle would require either an auto transport trailer, a two wheel tow dolly, or a tow bar system. Please visit your local U-Haul center for more information on a towing system that will work best for you."
What is proper adjustment fiction sway bars
"A friction sway control is pre-set at the factory with a tension suitable for most light trailers. To get maximum benefits from a friction sway control, a series of tests should be taken with the loaded trailer. During the first road test, try the sway control at the factory preset tension. On subsequent trips, increase or decrease tension by turning the adjustment bolt in 1/4 turn increments until the desired control is achieved. When towing during slippery conditions such as wet, icy or snow covered roads or on loose gravel, turn the on/off handle counterclockwise until all tension is removed from the unit. Failure to do so could prevent tow vehicle and trailer from turning properly."
Can this be put on a 1998 camero
Our hitch pro writes: "The Camaro hitches are class one 1-1/4" receivers and will not accept weight distribution hitches."
Does uhaul install weight distrubution bars
Our hitch pro writes: U-Haul sells and installs complete towing packages including weight distribution hitches. For complete pricing, please contact your local U-Haul center.