Trousse de démarrage de remorquage boule d’attache de remorque de 2 po (chute de 2-1/4, 7 500 lb)

Trousse de démarrage de remorquage boule d’attache de remorque de 2 po (chute de 2-1/4, 7 500 lb)

Prix
29,99 $ 29,99 $ 29,99 $

Entrez votre code postal pour vérifier la disponibilité du produit dans les établissements U-Haul près de chez vous.

Veuillez prendre note

  • *La trousse ne comprend pas de câblage

Description

Description du produit

Numéro de produit :
TS1

Vous tirez une remorque? Cette trousse de démarrage pour remorquage, notre combinaison de remorquage la plus vendue, contient tout* ce dont vous avez besoin pour attacher une remorque à votre receveur d'attache de remorque de 2 po!

  • Économisez de l'argent sur les produits dont vous avez besoin en combinant les articles de cette trousse.
  • Aucun outil spécial n'est requis pour attacher ce produit puisque la boule est serrée à l'avance.
  • Prêt en quelques minutes! La conception simple est prête pour l'insertion d'un receveur d'attache de remorque de 2 po et vous permet de remorquer en quelques minutes.
  • Vous remorquez une charge lourde? Cette trousse permet de remorquer jusqu'à 7 500 lb.
  • La trousse comprend une boule d'attache de remorque de 2 po, une clavette et goupille de 5/8 po et un montage de boule d'attache de remorque à chute de 2-1/4 po
  • La boule d'attache de remorque U-Haul offre plus de caractéristiques de sécurité que toute autre boule d'attache de remorque de l'industrie du remorquage.

Évaluations (0)

Questions et réponses (45)

Questions et réponses (45)

Pour voir la réponse à une question, cliquez simplement sur cette dernière. Pour publier une nouvelle question, cliquez sur le bouton « Poser une question » ci-dessous.

Poser une question

*Toutes les questions sont revues et approuvées avant d'être publiées ou avant d'y répondre.
Veuillez poser des questions appropriées qui ont rapport au produit.

When I buy this, will the ball already be attached?

-Zane 1/8/2023 6h38m31 pm

Hi Zane. Yes! Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Have a great day!

-Kristy 3/8/2023 10h37m48 am

Can this be used as a rise? Thank you!

-Theresa Gonzales 30/7/2023 11h37m51 am

Hi Theresa. Yes. Just flip it over. Have a great day!

-Kristy 3/8/2023 11h52m39 am

What is the shank length for this hitch?

-Harrison 25/7/2023 11h06m25 pm

Hi Harrison! The shank length on the TS1 is 7,5" I hope that helps. Have a great day!

-Kristy 27/7/2023 10h17m04 am

Do you buy back powertow Hitch when done?

-Eric Smith 11/7/2023 9h31m19 am

Hi Eric! These are for purchase only. Have a great day!

-Kristy 12/7/2023 9h19m01 am

What size wrench do I need for the screw so that I can flip the ball. Need to make it a riser.

-The O 8/7/2023 6h26m51 pm

Hi there! 1 5/8 - If needed please use the U-Haul part number WRENCH which can be found with this link. https://www.uhaul.com/MovingSupplies/Hitch-Balls-Mounts/Hitch-Balls/Hitch-Ball-Wrench/?id=3565 I hope that helps and have a great day!

-Kristy 14/7/2023 8h41m44 am

What size tow ball do I need for a U-Haul trailer

-Carl scsrduzio 2/7/2023 6h26m45 pm

Hi Carl. You will need a 2in ball. Have a great day!

-Kristy 10/7/2023 10h33m04 am

My hitch receiver height is 16" from the top inside of the receiver to the ground. Can I use this one to tow your cargo trailer?

-Khoa 30/5/2023 10h07m45 am

Hi Khoa! The recommended height should be 18" - 24" to be even. If you stick with the 16" it will have a slight incline & will put more tongue weight on the hitch which could be damaging depending on the cargo weight. I hope that helps.

-Kristy 15/6/2023 8h27m21 am

I have a 2011 toyota camry, what size for the drawbar like riser would i need for the 5x8 trailer?

-Steven 14/3/2023 3h01m27 pm

Hi Steven. The trim package is needed in order to get the part you will need. Please visit www.uhaul.com/hitches and enter your vehicle information. It will then list all part numbers needed. I hope that helps.

-Kristy 16/3/2023 10h56m58 am

I have a 2" hitch on my Subaru Outback 2022. Will this be enough for me to tow a 5 X 8 U haul trailer? Thx!

-Jerry 6/3/2023 11h19m42 am

That is the correct size hitch. Please go to uhaul.com/trailers and enter your vehicle information. It will advise which trailer you can and can not tow. I hope that helps. -Kristy

-Kristy 6/3/2023 1h24m42 pm

Do it come with the ball too?

-Willard snow 10/2/2023 2h45m54 pm

Hello Willard! Yes, is does. Thanks for asking.

-Kristy 13/2/2023 11h15m17 am

What is the size of the bolt which secures the ball?

-Cale 12/1/2023 12h05m25 pm

Hi Cale! This is a 1 inch bolt.

-Kristy 16/1/2023 12h09m58 pm

hello, please tell me how much would be the total cost for a 2" receiver hitch and the installation. 2019 Kia Sportage so I can put a mobility scooter ramp on it. Please email me at dcjsmith1@yahoo.com Thank you, Donald Smith

-Donald Smith 24/12/2022 4h33m57 pm

Hi Donald, please contact sales and reservations to get this quote. 800-468-4285. Thank you.

-Kristy 28/12/2022 6h48m43 am

What is the tongue weight rating for this?

-Cody 1/4/2021 5h13m04 pm

Hello Cody, 750 lbs. Thank you

-Frank 5/4/2021 11h22m02 am

Hello Cody, 750 lbs. Thank you

-Frank 5/4/2021 11h22m24 am

What is the distance between the center of the hitch pin to the back of the slanted part?

-Kayvan 22/3/2021 5h56m28 pm

Hello Kayvan, The pin and clip hole is 10" from the end of the hitch. Thanks for asking!

-Frank 24/3/2021 7h49m53 am

Hello Kayvan, The pin and clip hole is 10" from the end of the hitch. Thanks for asking!

-Frank 24/3/2021 7h50m50 am

Hello Kayvan, The pin and clip hole is 10" from the end of the hitch. Thanks for asking!

-Frank 24/3/2021 7h50m52 am

Hello Kayvan, The pin and clip hole is 10" from the end of the hitch. Thanks for asking!

-Frank 24/3/2021 7h50m53 am

Will this kit work towing a 6 X 12 cargo trailer with a 2018 Ford Flex?

-Ken Mittelholtz 27/2/2021 12h25m34 pm

Hello Ken, Please visit our Trailer Hitches page and enter your vehicle specifications to see all available and compatible hitch models as well as compatible accessories and towing components. Thank you!

-Frank 1/3/2021 6h20m39 am

Hello Ken, Please visit our Trailer Hitches page and enter your vehicle specifications to see all available and compatible hitch models as well as compatible accessories and towing components. Thank you!

-Frank 1/3/2021 6h21m01 am

What is the ball weight rating and ball mount rating ?

-Kate 17/2/2021 11h11m25 am

Good Morning Kate, Up to 7500 lbs. on both. Thank you

-Frank 18/2/2021 6h08m10 am

Good Morning Kate, Up to 7500 lbs. on both. Thank you

-Frank 18/2/2021 6h08m34 am

Product description says it comes with pin and clip, but a reviewer said it does not. Does this kit come with the pin and clip?

-Mike 15/2/2021 12h37m25 pm

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h32m13 am

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h33m09 am

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h33m45 am

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h33m45 am

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h33m46 am

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h33m47 am

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h33m47 am

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h33m48 am

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h33m49 am

I have a 2020 Mercedes GLS 580...is this the proper ball for it?

-Karma Nelson 23/12/2020 4h01m29 pm

A: Please visit our Trailer Hitches page and enter your vehicle specifications to see all available and compatible hitch models as well as compatible accessories and towing components. Thank you!

-Frank 24/12/2020 6h42m25 am

Does it fit 2019 Audi Q5 (w/ preinstalled hitch)? 2” Towing Starter Kit (2-1/4” Drop, 7 500 lbs.)

-Sonny Oh 8/11/2020 3h12m46 pm

Hi Sonny, Please visit our Trailer Hitches page and enter your vehicle specifications to see all available and compatible hitch models as well as compatible accessories and towing components. Thank you!

-Frank 9/11/2020 10h58m14 am

Will You at uhaul install this for me

-Amy Jones 25/10/2020 8h34m32 am

Hi Amy, Pricing may vary depending on your location and your vehicle specifications. Please contact your local U-Haul Hitch Center to receive an installation pricing quote. Thank you!

-Frank 26/10/2020 8h57m30 am

Do you know if this will fit a 2017 Jeep Grand Cherokee?

-Ryan Clandening 24/9/2020 12h48m52 pm

Hi Ryan, Please visit our Trailer Hitches page and enter your vehicle specifications to see all available and compatible hitch models as well as compatible accessories and towing components. Thank you!

-Frank 6/10/2020 2h15m24 pm

What is the Auto Transport /Vehicle Trailer HITCH HEIGHT from the ground to the bottom of the trailer coupler, so I can plan ahead and get the appropriate hitch. Thanks

-Gordon N Joczik 23/9/2020 6h30m17 am

Hi Gordon, You need a ball mount to raise your hook up to where the ball is no less than 18" above the ground. Or, no more than 24" above the ground. If you are going to be pulling a heavy trailer, try to get a rise closer to the 24". A light trailer closer to 20" above the ground. In either event, please check with a UHaul Center if you have any questions. Thank you

-Frank 6/10/2020 2h14m02 pm

is this hitch reversible?

- Janet 4/9/2020 9h34m27 am

Hi, Janet! Yes, this ball mount is reversible. Thank you!

-Savannah 9/29/2020 2h40:36 PM

Hi, I have a 2019 F150 with factory hitch. 2" What size ball attachment do I need.? Do u have? Thanks John

-John 1/6/2020 7h04m32 am

Hello, John! If you are towing a U-Haul trailer, please use Ball Mount 13115 and Hitch Ball 4944. If you need a ball mount for a personal trailer, please contact your local U-Haul Hitch Center so they can assist you with finding the best product options for you. Thank you!

-Savannah 19/6/2020 9h00m03 am

I have a 2019 Hyundai Santa Fe with a class 3 hitch what size drop down receiver do I need to tow a Uhaul 5' x8' trailer.

-Bill Uhl 20/5/2020 6h13m33 pm

I have a factory installed class III towing hitch installed on my 2015 Nissan Pathfinder. Is this the right ball mount? It does not specify the class this is for but I need a 2" ball.

-Anonymous 11/7/2019 4h15m36 pm

Hello! Please select a 2" ball mount that closely matches the trailer coupler height when level and that has a weight capacity that exceeds the gross trailer weight. To do this, measure the top of the receiver to the ground, then level trailer and measure from the bottom of the coupler to the ground, the difference between the two measurements will be the correct ball mount height needed. You will then need to purchase and install the 2" ball - U-Haul part 4944 features a weight capacity of 7 500 lbs and industry-leading safety cotter pin.

You can also opt to visit your local U-Haul Hitch Center for a free towing inspection. I hope that is helpful!

-Savannah 31/7/2019 11h22m02 am

What size ball shank does this mount take. 1" or 3/4"

-Daniel J Tardif 23/6/2019 2h30m52 pm

Hi, Daniel! The ball shank diameter is 1". Thanks for asking!

-Savannah 7/22/2019 3h04:26 PM

I have a 2010 rx 350 will this fit

-Aaron lee 4/5/2019 11h43m12 am

Hi, Aaron! The TS1 ball mount fits 2" receiver hitches. For more information on this product and ball mounts, please visit your nearest U-haul Hitch Center for a free tow hitch inspection. Thank you!

-Savannah 5/13/2019 3h45:07 PM

what is the length

-herman 18/4/2019 6h29m28 pm

Hi, Herman! The length of this ball mount is 7-1/2". Thanks for asking!

-Savannah 25/4/2019 7h14m55 am

How far is the pin/clip hole from the end of the hitch?

-Randy Motz 17/4/2019 7h44m04 am

Hi, Randy! The pin and clip hole is 10" from the end of the hitch. Thanks for asking!

-Savannah 4/30/2019 2h25:01 PM

Is the 2" Towing starter Kit manufactured in the USA?

-George 18/3/2019 10h29m06 am

Hello, George! No, our 2" Towing Starter Kit is manufactured in China. Thanks for asking!

-Savannah 19/3/2019 7h27m06 am

What is the length of the ball mount; my 2000 Toyota 4Runner requires a 2-1/4 drop - 8-1/2 length?

-Gary 7/3/2019 9h29m29 am

Hi, Gary! The length is 7-1/2". Please use ball mount 13113, ball 4944, and pin & clip part 3131. Thank you!

-Savannah 16/4/2019 8h12m00 am

Does this include the pin and any other hardware required to attach to the vehicle hitch?

-JACOB SHARRATT 1/3/2019 8h35m45 am

Hello, Jacob! This kit includes everything you will need to attach a trailer to your 2" receiver hitch - it includes: a 2" ball, a 5/8" pin and clip, and a 2-1/4" drop ball mount. I hope that is helpful!

-Savannah 4/3/2019 11h00m56 am

Is this kit removable then reusable?

-Janet R Estep 26/9/2018 2h58m38 am

Hi, Janet! Yes, our towing starter kits can be removed and reused. Thank you!

-Savannah 10/30/2018 3h45:50 PM

Can you flip this 7500 lb hitch 2-1/4 drop over to get a rise and still have 7500 lb rating?

-Roland Pierson 4/9/2018 11h21m58 am

Hey, Roland! This ball mount carries the same weight rating in both rise and drop positions. Thanks for asking!

-Savannah 10/15/2018 2h07:19 PM

i have a 2017 toyota tacoma crew cab SR5 set up for towing but do not have receiver and ball for hitch. it is 6000lb. towing capacity . Which started kit would I need? I plan to rent your 12X6 foot trailer soon for a move and then use for pulling a travel trailer.

-Wayne 9/8/2018 8h23m46 am

Hello, Wayne! Please measure from the ground to the top inside portion of your 2" receiver tube. The difference between your measurement and the U-Haul trailer coupler measurement (18 inches) will be the necessary drop or rise needed. For more help, please see our article on How to Select the Correct Ball Mount for your Hitch or visit your local U-Haul Hitch Center. Thank you!

-Savannah 20/9/2018 10h09m52 am

How to install it to my SUV, I don't have any experience before. Is the Uhaul staff can help me finish the installatin? Thanks

-JW 14/3/2018 4h22m10 pm

Hello! Any U-Haul Hitch Center would be happy to assist you with installation of your towing starter kit. Please visit or contact the center of your choice. Thank you!

-Savannah 15/3/2018 10h06m42 am

If I were to purchase a lock for the tow while utilizing a U-Haul 2 1/4" or 3 1/2" starter drop, what size lock pin is required? 1/2" and 5/8" hitch pin? Or, does U-Haul sale locks as I would rather lock the trailer on rather than deal with someone disconnecting the trailer and possibly driving off with it.

-Richard Gaines 27/1/2018 7h32m41 am

Hi, Richard! The U-Haul 2" Starter kits are designed with a 5/8" diameter pin hole. Please see the U-Haul lock set part 3794DAT. Thank you!

-Savannah 30/1/2018 11h22m47 am

What is the distance between the center of the hitch pin and the center of the ball/post?

-Ann P 28/10/2017 9h59m44 pm

Hi, Ann! The distance is 8-1/4 inches. Thanks for asking!

-Savannah 27/11/2017 10h25m02 am

Am I purchasing this or just renting?

-Nichole Gulbranson 6/7/2017 1h42m55 pm

Hi, Nichole! If you purchase the towing starter kit, it is yours to keep. This product is not available for rent. Thanks for asking!

-Savannah 7/6/2017 4h16:10 PM

Do i return the tow hitch starter kit when i am finished??

-N/a 2/8/2016 3h25m40 pm

If you purchase this item, it is yours to keep. It is not a rental item.

-SAVANNAH 3/8/2016 10h04m29 am

do you offer hitches to fit 1,5" receivers?

-Zach 2/2/2016 7h53m02 am

My tow bar hitch is 12 inches off the ground, so would I need Towing kit that would set the ball @ 18'' above the ground making it a 8 inch up set up?

-Roger 20/6/2014 11h15m50 am

You need a ball mount to raise your hook up to where the ball is no less than 18" above the ground. Or, no more than 24" above the ground. If you are going to be pulling a heavy trailer, try to get a rise closer to the 24". A light trailer closer to 20" above the ground. In either event, please check with a UHaul Center if you have any questions.

–Ronald 6/20/2014 2:42:38 PM

Is this available with a 2" ball ?

-me 15/5/2014 11h42m09 am

The ball on this product is a 2" ball. Thank you.

–Ronald 5/15/2014 12:03:24 PM

How do I know if I need a 2 1/4 or 3 1/2 inch drop. Which does a U-Haul trailer require?

-Mark Clark 11/3/2014 7h01m12 pm

Our hitch pro writes: "For a safe comfortable ride the trailer should be set up to tow on a level plane, U-Haul trailer coupler heights when level are approximately 18 inches off the ground. However, before you tow it is always recommended to visit your local U-Haul center for a free tow inspection."

–Ronald 3/14/2014 9:13:20 AM

Description du produit

Numéro de produit :
TS1

Vous tirez une remorque? Cette trousse de démarrage pour remorquage, notre combinaison de remorquage la plus vendue, contient tout* ce dont vous avez besoin pour attacher une remorque à votre receveur d'attache de remorque de 2 po!

  • Économisez de l'argent sur les produits dont vous avez besoin en combinant les articles de cette trousse.
  • Aucun outil spécial n'est requis pour attacher ce produit puisque la boule est serrée à l'avance.
  • Prêt en quelques minutes! La conception simple est prête pour l'insertion d'un receveur d'attache de remorque de 2 po et vous permet de remorquer en quelques minutes.
  • Vous remorquez une charge lourde? Cette trousse permet de remorquer jusqu'à 7 500 lb.
  • La trousse comprend une boule d'attache de remorque de 2 po, une clavette et goupille de 5/8 po et un montage de boule d'attache de remorque à chute de 2-1/4 po
  • La boule d'attache de remorque U-Haul offre plus de caractéristiques de sécurité que toute autre boule d'attache de remorque de l'industrie du remorquage.

Questions et réponses (45)

Pour voir la réponse à une question, cliquez simplement sur cette dernière. Pour publier une nouvelle question, cliquez sur le bouton « Poser une question » ci-dessous.

Poser une question

*Toutes les questions sont revues et approuvées avant d'être publiées ou avant d'y répondre.
Veuillez poser des questions appropriées qui ont rapport au produit.

When I buy this, will the ball already be attached?

-Zane 1/8/2023 6h38m31 pm

Hi Zane. Yes! Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Have a great day!

-Kristy 3/8/2023 10h37m48 am

Can this be used as a rise? Thank you!

-Theresa Gonzales 30/7/2023 11h37m51 am

Hi Theresa. Yes. Just flip it over. Have a great day!

-Kristy 3/8/2023 11h52m39 am

What is the shank length for this hitch?

-Harrison 25/7/2023 11h06m25 pm

Hi Harrison! The shank length on the TS1 is 7,5" I hope that helps. Have a great day!

-Kristy 27/7/2023 10h17m04 am

Do you buy back powertow Hitch when done?

-Eric Smith 11/7/2023 9h31m19 am

Hi Eric! These are for purchase only. Have a great day!

-Kristy 12/7/2023 9h19m01 am

What size wrench do I need for the screw so that I can flip the ball. Need to make it a riser.

-The O 8/7/2023 6h26m51 pm

Hi there! 1 5/8 - If needed please use the U-Haul part number WRENCH which can be found with this link. https://www.uhaul.com/MovingSupplies/Hitch-Balls-Mounts/Hitch-Balls/Hitch-Ball-Wrench/?id=3565 I hope that helps and have a great day!

-Kristy 14/7/2023 8h41m44 am

What size tow ball do I need for a U-Haul trailer

-Carl scsrduzio 2/7/2023 6h26m45 pm

Hi Carl. You will need a 2in ball. Have a great day!

-Kristy 10/7/2023 10h33m04 am

My hitch receiver height is 16" from the top inside of the receiver to the ground. Can I use this one to tow your cargo trailer?

-Khoa 30/5/2023 10h07m45 am

Hi Khoa! The recommended height should be 18" - 24" to be even. If you stick with the 16" it will have a slight incline & will put more tongue weight on the hitch which could be damaging depending on the cargo weight. I hope that helps.

-Kristy 15/6/2023 8h27m21 am

I have a 2011 toyota camry, what size for the drawbar like riser would i need for the 5x8 trailer?

-Steven 14/3/2023 3h01m27 pm

Hi Steven. The trim package is needed in order to get the part you will need. Please visit www.uhaul.com/hitches and enter your vehicle information. It will then list all part numbers needed. I hope that helps.

-Kristy 16/3/2023 10h56m58 am

I have a 2" hitch on my Subaru Outback 2022. Will this be enough for me to tow a 5 X 8 U haul trailer? Thx!

-Jerry 6/3/2023 11h19m42 am

That is the correct size hitch. Please go to uhaul.com/trailers and enter your vehicle information. It will advise which trailer you can and can not tow. I hope that helps. -Kristy

-Kristy 6/3/2023 1h24m42 pm

Do it come with the ball too?

-Willard snow 10/2/2023 2h45m54 pm

Hello Willard! Yes, is does. Thanks for asking.

-Kristy 13/2/2023 11h15m17 am

What is the size of the bolt which secures the ball?

-Cale 12/1/2023 12h05m25 pm

Hi Cale! This is a 1 inch bolt.

-Kristy 16/1/2023 12h09m58 pm

hello, please tell me how much would be the total cost for a 2" receiver hitch and the installation. 2019 Kia Sportage so I can put a mobility scooter ramp on it. Please email me at dcjsmith1@yahoo.com Thank you, Donald Smith

-Donald Smith 24/12/2022 4h33m57 pm

Hi Donald, please contact sales and reservations to get this quote. 800-468-4285. Thank you.

-Kristy 28/12/2022 6h48m43 am

What is the tongue weight rating for this?

-Cody 1/4/2021 5h13m04 pm

Hello Cody, 750 lbs. Thank you

-Frank 5/4/2021 11h22m02 am

Hello Cody, 750 lbs. Thank you

-Frank 5/4/2021 11h22m24 am

What is the distance between the center of the hitch pin to the back of the slanted part?

-Kayvan 22/3/2021 5h56m28 pm

Hello Kayvan, The pin and clip hole is 10" from the end of the hitch. Thanks for asking!

-Frank 24/3/2021 7h49m53 am

Hello Kayvan, The pin and clip hole is 10" from the end of the hitch. Thanks for asking!

-Frank 24/3/2021 7h50m50 am

Hello Kayvan, The pin and clip hole is 10" from the end of the hitch. Thanks for asking!

-Frank 24/3/2021 7h50m52 am

Hello Kayvan, The pin and clip hole is 10" from the end of the hitch. Thanks for asking!

-Frank 24/3/2021 7h50m53 am

Will this kit work towing a 6 X 12 cargo trailer with a 2018 Ford Flex?

-Ken Mittelholtz 27/2/2021 12h25m34 pm

Hello Ken, Please visit our Trailer Hitches page and enter your vehicle specifications to see all available and compatible hitch models as well as compatible accessories and towing components. Thank you!

-Frank 1/3/2021 6h20m39 am

Hello Ken, Please visit our Trailer Hitches page and enter your vehicle specifications to see all available and compatible hitch models as well as compatible accessories and towing components. Thank you!

-Frank 1/3/2021 6h21m01 am

What is the ball weight rating and ball mount rating ?

-Kate 17/2/2021 11h11m25 am

Good Morning Kate, Up to 7500 lbs. on both. Thank you

-Frank 18/2/2021 6h08m10 am

Good Morning Kate, Up to 7500 lbs. on both. Thank you

-Frank 18/2/2021 6h08m34 am

Product description says it comes with pin and clip, but a reviewer said it does not. Does this kit come with the pin and clip?

-Mike 15/2/2021 12h37m25 pm

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h32m13 am

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h33m09 am

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h33m45 am

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h33m45 am

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h33m46 am

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h33m47 am

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h33m47 am

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h33m48 am

Hello Mike, Yes, the Kit Includes: 2" ball, 5/8" pin and clip, and 2-1/4" drop ball mount. Thank you for your question.

-Frank 16/2/2021 6h33m49 am

I have a 2020 Mercedes GLS 580...is this the proper ball for it?

-Karma Nelson 23/12/2020 4h01m29 pm

A: Please visit our Trailer Hitches page and enter your vehicle specifications to see all available and compatible hitch models as well as compatible accessories and towing components. Thank you!

-Frank 24/12/2020 6h42m25 am

Does it fit 2019 Audi Q5 (w/ preinstalled hitch)? 2” Towing Starter Kit (2-1/4” Drop, 7 500 lbs.)

-Sonny Oh 8/11/2020 3h12m46 pm

Hi Sonny, Please visit our Trailer Hitches page and enter your vehicle specifications to see all available and compatible hitch models as well as compatible accessories and towing components. Thank you!

-Frank 9/11/2020 10h58m14 am

Will You at uhaul install this for me

-Amy Jones 25/10/2020 8h34m32 am

Hi Amy, Pricing may vary depending on your location and your vehicle specifications. Please contact your local U-Haul Hitch Center to receive an installation pricing quote. Thank you!

-Frank 26/10/2020 8h57m30 am

Do you know if this will fit a 2017 Jeep Grand Cherokee?

-Ryan Clandening 24/9/2020 12h48m52 pm

Hi Ryan, Please visit our Trailer Hitches page and enter your vehicle specifications to see all available and compatible hitch models as well as compatible accessories and towing components. Thank you!

-Frank 6/10/2020 2h15m24 pm

What is the Auto Transport /Vehicle Trailer HITCH HEIGHT from the ground to the bottom of the trailer coupler, so I can plan ahead and get the appropriate hitch. Thanks

-Gordon N Joczik 23/9/2020 6h30m17 am

Hi Gordon, You need a ball mount to raise your hook up to where the ball is no less than 18" above the ground. Or, no more than 24" above the ground. If you are going to be pulling a heavy trailer, try to get a rise closer to the 24". A light trailer closer to 20" above the ground. In either event, please check with a UHaul Center if you have any questions. Thank you

-Frank 6/10/2020 2h14m02 pm

is this hitch reversible?

- Janet 4/9/2020 9h34m27 am

Hi, Janet! Yes, this ball mount is reversible. Thank you!

-Savannah 9/29/2020 2h40:36 PM

Hi, I have a 2019 F150 with factory hitch. 2" What size ball attachment do I need.? Do u have? Thanks John

-John 1/6/2020 7h04m32 am

Hello, John! If you are towing a U-Haul trailer, please use Ball Mount 13115 and Hitch Ball 4944. If you need a ball mount for a personal trailer, please contact your local U-Haul Hitch Center so they can assist you with finding the best product options for you. Thank you!

-Savannah 19/6/2020 9h00m03 am

I have a 2019 Hyundai Santa Fe with a class 3 hitch what size drop down receiver do I need to tow a Uhaul 5' x8' trailer.

-Bill Uhl 20/5/2020 6h13m33 pm

I have a factory installed class III towing hitch installed on my 2015 Nissan Pathfinder. Is this the right ball mount? It does not specify the class this is for but I need a 2" ball.

-Anonymous 11/7/2019 4h15m36 pm

Hello! Please select a 2" ball mount that closely matches the trailer coupler height when level and that has a weight capacity that exceeds the gross trailer weight. To do this, measure the top of the receiver to the ground, then level trailer and measure from the bottom of the coupler to the ground, the difference between the two measurements will be the correct ball mount height needed. You will then need to purchase and install the 2" ball - U-Haul part 4944 features a weight capacity of 7 500 lbs and industry-leading safety cotter pin.

You can also opt to visit your local U-Haul Hitch Center for a free towing inspection. I hope that is helpful!

-Savannah 31/7/2019 11h22m02 am

What size ball shank does this mount take. 1" or 3/4"

-Daniel J Tardif 23/6/2019 2h30m52 pm

Hi, Daniel! The ball shank diameter is 1". Thanks for asking!

-Savannah 7/22/2019 3h04:26 PM

I have a 2010 rx 350 will this fit

-Aaron lee 4/5/2019 11h43m12 am

Hi, Aaron! The TS1 ball mount fits 2" receiver hitches. For more information on this product and ball mounts, please visit your nearest U-haul Hitch Center for a free tow hitch inspection. Thank you!

-Savannah 5/13/2019 3h45:07 PM

what is the length

-herman 18/4/2019 6h29m28 pm

Hi, Herman! The length of this ball mount is 7-1/2". Thanks for asking!

-Savannah 25/4/2019 7h14m55 am

How far is the pin/clip hole from the end of the hitch?

-Randy Motz 17/4/2019 7h44m04 am

Hi, Randy! The pin and clip hole is 10" from the end of the hitch. Thanks for asking!

-Savannah 4/30/2019 2h25:01 PM

Is the 2" Towing starter Kit manufactured in the USA?

-George 18/3/2019 10h29m06 am

Hello, George! No, our 2" Towing Starter Kit is manufactured in China. Thanks for asking!

-Savannah 19/3/2019 7h27m06 am

What is the length of the ball mount; my 2000 Toyota 4Runner requires a 2-1/4 drop - 8-1/2 length?

-Gary 7/3/2019 9h29m29 am

Hi, Gary! The length is 7-1/2". Please use ball mount 13113, ball 4944, and pin & clip part 3131. Thank you!

-Savannah 16/4/2019 8h12m00 am

Does this include the pin and any other hardware required to attach to the vehicle hitch?

-JACOB SHARRATT 1/3/2019 8h35m45 am

Hello, Jacob! This kit includes everything you will need to attach a trailer to your 2" receiver hitch - it includes: a 2" ball, a 5/8" pin and clip, and a 2-1/4" drop ball mount. I hope that is helpful!

-Savannah 4/3/2019 11h00m56 am

Is this kit removable then reusable?

-Janet R Estep 26/9/2018 2h58m38 am

Hi, Janet! Yes, our towing starter kits can be removed and reused. Thank you!

-Savannah 10/30/2018 3h45:50 PM

Can you flip this 7500 lb hitch 2-1/4 drop over to get a rise and still have 7500 lb rating?

-Roland Pierson 4/9/2018 11h21m58 am

Hey, Roland! This ball mount carries the same weight rating in both rise and drop positions. Thanks for asking!

-Savannah 10/15/2018 2h07:19 PM

i have a 2017 toyota tacoma crew cab SR5 set up for towing but do not have receiver and ball for hitch. it is 6000lb. towing capacity . Which started kit would I need? I plan to rent your 12X6 foot trailer soon for a move and then use for pulling a travel trailer.

-Wayne 9/8/2018 8h23m46 am

Hello, Wayne! Please measure from the ground to the top inside portion of your 2" receiver tube. The difference between your measurement and the U-Haul trailer coupler measurement (18 inches) will be the necessary drop or rise needed. For more help, please see our article on How to Select the Correct Ball Mount for your Hitch or visit your local U-Haul Hitch Center. Thank you!

-Savannah 20/9/2018 10h09m52 am

How to install it to my SUV, I don't have any experience before. Is the Uhaul staff can help me finish the installatin? Thanks

-JW 14/3/2018 4h22m10 pm

Hello! Any U-Haul Hitch Center would be happy to assist you with installation of your towing starter kit. Please visit or contact the center of your choice. Thank you!

-Savannah 15/3/2018 10h06m42 am

If I were to purchase a lock for the tow while utilizing a U-Haul 2 1/4" or 3 1/2" starter drop, what size lock pin is required? 1/2" and 5/8" hitch pin? Or, does U-Haul sale locks as I would rather lock the trailer on rather than deal with someone disconnecting the trailer and possibly driving off with it.

-Richard Gaines 27/1/2018 7h32m41 am

Hi, Richard! The U-Haul 2" Starter kits are designed with a 5/8" diameter pin hole. Please see the U-Haul lock set part 3794DAT. Thank you!

-Savannah 30/1/2018 11h22m47 am

What is the distance between the center of the hitch pin and the center of the ball/post?

-Ann P 28/10/2017 9h59m44 pm

Hi, Ann! The distance is 8-1/4 inches. Thanks for asking!

-Savannah 27/11/2017 10h25m02 am

Am I purchasing this or just renting?

-Nichole Gulbranson 6/7/2017 1h42m55 pm

Hi, Nichole! If you purchase the towing starter kit, it is yours to keep. This product is not available for rent. Thanks for asking!

-Savannah 7/6/2017 4h16:10 PM

Do i return the tow hitch starter kit when i am finished??

-N/a 2/8/2016 3h25m40 pm

If you purchase this item, it is yours to keep. It is not a rental item.

-SAVANNAH 3/8/2016 10h04m29 am

do you offer hitches to fit 1,5" receivers?

-Zach 2/2/2016 7h53m02 am

My tow bar hitch is 12 inches off the ground, so would I need Towing kit that would set the ball @ 18'' above the ground making it a 8 inch up set up?

-Roger 20/6/2014 11h15m50 am

You need a ball mount to raise your hook up to where the ball is no less than 18" above the ground. Or, no more than 24" above the ground. If you are going to be pulling a heavy trailer, try to get a rise closer to the 24". A light trailer closer to 20" above the ground. In either event, please check with a UHaul Center if you have any questions.

–Ronald 6/20/2014 2:42:38 PM

Is this available with a 2" ball ?

-me 15/5/2014 11h42m09 am

The ball on this product is a 2" ball. Thank you.

–Ronald 5/15/2014 12:03:24 PM

How do I know if I need a 2 1/4 or 3 1/2 inch drop. Which does a U-Haul trailer require?

-Mark Clark 11/3/2014 7h01m12 pm

Our hitch pro writes: "For a safe comfortable ride the trailer should be set up to tow on a level plane, U-Haul trailer coupler heights when level are approximately 18 inches off the ground. However, before you tow it is always recommended to visit your local U-Haul center for a free tow inspection."

–Ronald 3/14/2014 9:13:20 AM

Retour
Haut de la page