Hi, Vincent! The nut on the 2" ball is 1-5/8". Thanks for asking!
Boules et montages d'attache de remorque Boules d'attache de remorque
Boule d'attache de remorque de 2 po, longueur de tube de 2-3/16 po
Boule d'attache de remorque de 2 po, longueur de tube de 2-3/16 po
Description
Description du produit
- Numéro de produit :
- 4944
Boule d'attache de remorque de 2 po avec tige de 1 po de diamètre. Tige d'une longueur de 2-3/16 po Capacité de 7,500 lb
- La boule d'attache de remorque U-Haul offre plus de particularités de sécurité que toute autre boule d'attache de remorque dans ce secteur d'activité.
- La goupille fendue la plus sécuritaire.
- Collier de serrage exclusif.
- Rondelle plate durcie au lieu d'une rondelle de blocage.
- Capacité de 7,500 lb
- La boule d'attache de remorque U-Haul offre plus de caractéristiques de sécurité que toute autre boule d'attache de remorque de l'industrie du remorquage.
Évaluations (0)
Questions et réponses (6)
Questions et réponses (6)
Description du produit
- Numéro de produit :
- 4944
Boule d'attache de remorque de 2 po avec tige de 1 po de diamètre. Tige d'une longueur de 2-3/16 po Capacité de 7,500 lb
- La boule d'attache de remorque U-Haul offre plus de particularités de sécurité que toute autre boule d'attache de remorque dans ce secteur d'activité.
- La goupille fendue la plus sécuritaire.
- Collier de serrage exclusif.
- Rondelle plate durcie au lieu d'une rondelle de blocage.
- Capacité de 7,500 lb
- La boule d'attache de remorque U-Haul offre plus de caractéristiques de sécurité que toute autre boule d'attache de remorque de l'industrie du remorquage.
Questions et réponses (6)
What is used to stabilize the trailer? I do not see any kind of stabilizing bar or sway bar?
U-Haul trailers are aerodynamic, lightweight and low profile for better gas mileage.
Our wide track, stabilized suspension and low center of gravity make for moving made easier.
Thanks for asking!
The nut has a chamfer and a plastic washer. What is the correct way to install the nut and washer?
The plastic ring is used when installing without a torque wrench.
Simply insert the plastic ring into the recessed portion of the nut with the flat side of the ring remaining exposed. Place the ball shank through the platform hole, install the hardened flat washer and thread the nut onto the shank with the plastic ring facing upward (plastic ring between nut and washer).
The 2inch hitch ball with 1 inch shank # 4944 What size wrench fits the nut ? Tried 1 1/2" it was too small.
U-Haul sells the 1-5/8" wrench necessary for tightening the nut on this hitch ball at a low price of $16.95, please see U-Haul part number WRENCH found at your nearest U-Haul location.
Why does the information on the web page for the part number #4944 list it as "Weight Capacity is 7 500 lbs." and card that it is mounted on in the picture reads as "6 000 lb Gross Trailer Weight"? This certainly does not look good! I'm not that confused, right?
Thanks for pointing that out. Our hitch program manager is getting that image updated.
Do you install hitch ?
Yes, since 1945 U-Haul has been America's number one trailer hitch installer. For pricing and scheduling, please use our "Find a U-Haul location" option and contact your nearest U-Haul center.
Articles recommandés
Voir la disponibilité en magasin
Boule d'attache de remorque de 2 po, longueur de tube de 2-3/16 po
Boule d'attache de remorque de 2 po, longueur de tube de 2-3/16 po
Les commandes Acheter en ligne, prendre en magasin sont habituellement prêtes à la cueillette dans les deux heures après leur envoi. Les commandes passées après les heures d'ouverture seront prêtes à la cueillette le lendemain. La disponibilité en magasin dépend des stocks en magasin et est normalement mise à jour toutes les deux heures. Les commandes sont conservées quatre jours après le traitement.
What size nut is on the 2 inch ball"
Hi, Vincent! The nut on the 2" ball is 1-5/8". Thanks for asking!
What is used to stabilize the trailer? I do not see any kind of stabilizing bar or sway bar?
U-Haul trailers are aerodynamic, lightweight and low profile for better gas mileage.
Our wide track, stabilized suspension and low center of gravity make for moving made easier.
Thanks for asking!
The nut has a chamfer and a plastic washer. What is the correct way to install the nut and washer?
The plastic ring is used when installing without a torque wrench.
Simply insert the plastic ring into the recessed portion of the nut with the flat side of the ring remaining exposed. Place the ball shank through the platform hole, install the hardened flat washer and thread the nut onto the shank with the plastic ring facing upward (plastic ring between nut and washer).
The 2inch hitch ball with 1 inch shank # 4944 What size wrench fits the nut ? Tried 1 1/2" it was too small.
U-Haul sells the 1-5/8" wrench necessary for tightening the nut on this hitch ball at a low price of $16.95, please see U-Haul part number WRENCH found at your nearest U-Haul location.
Why does the information on the web page for the part number #4944 list it as "Weight Capacity is 7 500 lbs." and card that it is mounted on in the picture reads as "6 000 lb Gross Trailer Weight"? This certainly does not look good! I'm not that confused, right?
Thanks for pointing that out. Our hitch program manager is getting that image updated.
Do you install hitch ?
Yes, since 1945 U-Haul has been America's number one trailer hitch installer. For pricing and scheduling, please use our "Find a U-Haul location" option and contact your nearest U-Haul center.