Goupille de receveur anti-vibration

Prix
17,95 $ 17,95 $ 17,95 $

Entrez votre code postal pour vérifier la disponibilité du produit dans les établissements U-Haul près de chez vous.

Description

Description du produit

Numéro de produit :
13144

Clavette d'attache de remorque à verrou de diamètre de 5/8 po facile à installer pour toutes les attaches de remorque de style receveur de 2 po de classe III, IV et V

  • Goupille de receveur facile à installer pour installation sécuritaire
  • Verrou de receveur en acier usiné avec manchon de 5/8 po
  • Le verrou breveté comprend un joint torique interne et un couvercle étanche pour éviter la saleté et la corrosion
  • Comprend une clé à ouverture fixe et 2 clés renforcées
  • Compatible avec toutes les attaches de remorque de style receveur de 2 po de classe III, IV et V

Évaluations (0)

Questions et réponses (22)

Questions et réponses (22)

Pour voir la réponse à une question, cliquez simplement sur cette dernière. Pour publier une nouvelle question, cliquez sur le bouton « Poser une question » ci-dessous.

Poser une question

*Toutes les questions sont revues et approuvées avant d'être publiées ou avant d'y répondre.
Veuillez poser des questions appropriées qui ont rapport au produit.

How do you install? Packaging was not included when I purchased. Can you provide instructions, please? Merci.

-Eric W. 7/5/2021 7h32m20 pm

Hello Eric, Please email store@uhaul.com your order # and name. Thank you

-Frank 10/5/2021 11h56m57 am

Hello Eric, Please email store@uhaul.com your order # and name. Thank you

-Frank 10/5/2021 11h57m20 am

Will this work on the Reese Q-Slot 2 bike rack? I have a 2inch receiver.

-Ken 4/4/2021 6h54m55 am

Hi Ken, Yes, this rack works with receivers from 1.25 - 2 Inches. Thank you

-Frank 7/4/2021 12h31m01 pm

Hi Ken, Yes, this rack works with receivers from 1.25 - 2 Inches. Thank you

-Frank 7/4/2021 12h31m23 pm

Can i use this for a Swagman Trailhead 3 bike rack carrier whichis attached to a 2" receiver. The receiver bolt has some threads to keep the bike rack attached to the receiver.

-Darwin Margate 9/3/2021 11h54m22 am

Hello Darwin, Yes, it fits all 2" Class III, IV & V Receiver Style Hitches Thank you

-Frank 10/3/2021 6h38m27 am

Do you have the part anti rattel reciving pin 13144 is number part

-Pierre 18/1/2021 8h55m00 pm

Hello Pierre, Yes, these are in stock. Thank you

-Frank 19/1/2021 7h21m25 am

Will this pin work with the Yakima Longarm bed extender?

-Colin C. 10/7/2020 8h25m11 am

Hello, Colin! No, this pin is not compatible with the Yakima Longarm. Thank you!

-Savannah 8/10/2020 1h31:08 PM

Will it fit the Thule Combi Transporter Hitch Cargo Box?

-David 8/7/2020 11h10m34 am

Hello, David! No, this anti-rattle lock is not compatible with the Thule cargo box. Thank you!

-Savannah 8/10/2020 1h22:33 PM

Can I use it to lock my Saris Cycle On Pro 2” hitch bike rack on my Grand Cherokee Trail hawks 2” receiver?

-Virendra 26/4/2020 10h02m36 pm

Hello, Virendra! This receiver pin can be used with your bike rack as long as the thread on the bike rack is 5/8". I hope that is helpful!

-Savannah 28/4/2020 9h21m28 am

Where is this made?

-Brian 12/4/2020 10h12m41 am

Hello, Brian! This anti-rattle receiver pin is made in China. Thanks for asking!

-Savannah 13/4/2020 9h38m22 am

Is it possible to get 3 kit but with one key set for all 3 kit .

-Luc 1/1/2020 3h04m43 pm

Hi, Luc! Unfortunately, we do not offer that option. If you were to purchase 3 of our anti-rattle receiver pins, each would be keyed differently. Thanks for asking!

-Savannah 8/1/2020 7h33m20 am

Does this work with Yakima Stickup?

-Harry 31/12/2019 1h21m55 am

Hi, Harry! No, this receiver pin is not compatible with a Yakima Stickup. Thanks for asking!

-Savannah 21/1/2020 7h19m31 am

Can I get new keys for my hitch pin?

-John 12/2/2019 9h53m18 pm

Hi, John! If you misplaced your keys, your only option would be to purchase another hitch pin completely. If you have misplaced the keys and the hitch pin is locked onto something, please contact a local locksmith to identify the best way to remove it. Thank you!

-Savannah 13/2/2019 9h21m46 am

Will it work with a stepper ?

-Tibi 9/11/2018 7h13m18 am

Hi, Tibi! The 13144 receiver pin will work with any 2" hollow shank. Thanks for asking!

-Savannah 12/6/2018 2h48:38 PM

Will this work on a Yakima four timer bike rack 2" receiver?

-Martin Horvatich 20/7/2018 6h23m03 am

Hi, Martin! No, this anti-rattle receiver pin will not work with a Yakima Four Timer. Please note that an anti-rattle hitch lock is included with the purchase of a Yakima Four Timer. Thank you!

-Savannah 8/30/2018 1h58:24 PM

Will this work on a class 2 receiver hitch I just had installed at Uhaul?

-Debbie Hoskison 13/6/2018 6h54m22 am

Hey, Debbie! The 13144 anti-rattle receiver pin will not work for a class II receiver hitch. Please consider the Dual Bent Pin Lock, which is designed for class II receiver hitches. Thank you!

-Savannah 17/7/2018 10h19m51 am

I have 2018 Tundra. Looks like it needs long than normal pin. Would this work? Or do you have other pin would work for Tundra?

-Johnny 6/6/2018 12h50m57 pm

Will this work with a Thule bike lock, given they have their own patented system? What is the bolt and thread size of this lock?

-David 12/3/2018 1h17m15 pm

Hi, David! This anti-rattle receiver pin will not work with the Thule bike lock. Thank you for asking!

-Savannah 4/12/2018 2h34:52 PM

What is the shear strength for this pin, I.E. Towing capacity? Is it rated for use with a 5000 pound trailer

-Sherman 10/5/2016 3h43m50 am

The 13144 are rated at 32,000 pounds double shear load.

-SAVANNAH 16/6/2016 10h44m24 am

Is there something we don't see in the picture because i don't see how you can put the nut inside the ball mount ? How does it install ?

-Patrick 5/4/2016 7h47m29 pm

The nut is fastened to a C channel bracket that fully fits inside the ball mount.

–Joseph 4/7/2016 3:47:35 PM

Will this pin work with threaded 1 1 /4 shank?

-David 16/3/2016 8h25m30 am

The 5/8 diameter locking hitch pin part 13144 fits all 2" receiver style hitches.

Please visit your local U-Haul hitch center for more information on anti rattle locking pins to fit your threaded 1-1/4" shank.

–Joseph 3/17/2016 3:44:19 PM

Are these available "keyed alike" for adjustable class iv hitches? I have four(4)hitch pins on my adjustable hitch so I would need four (4)

-Crawford 26/8/2015 11h17m47 am

Each 13144 lock is designed with a different key code and are not available to order "keyed alike".

–Joseph 8/28/2015 4:56:04 PM

this part will serve as antiwebbing?

-Eduardo 20/5/2015 7h27m38 am

The 13144 locking anti-rattle receiver pin helps deter theft and helps eliminate ball mount rattle and vibration.

–Joseph 5/22/2015 4:08:05 PM

Will this work on a solid shank? I am looking for a anti rattle lock for my distribution hitch that has a solid shank.

-Robert 19/5/2015 4h59m28 pm

Currently U-Haul does not offer a solid shank anti rattle device.

–Joseph 5/22/2015 4:07:52 PM

Description du produit

Numéro de produit :
13144

Clavette d'attache de remorque à verrou de diamètre de 5/8 po facile à installer pour toutes les attaches de remorque de style receveur de 2 po de classe III, IV et V

  • Goupille de receveur facile à installer pour installation sécuritaire
  • Verrou de receveur en acier usiné avec manchon de 5/8 po
  • Le verrou breveté comprend un joint torique interne et un couvercle étanche pour éviter la saleté et la corrosion
  • Comprend une clé à ouverture fixe et 2 clés renforcées
  • Compatible avec toutes les attaches de remorque de style receveur de 2 po de classe III, IV et V

Questions et réponses (22)

Pour voir la réponse à une question, cliquez simplement sur cette dernière. Pour publier une nouvelle question, cliquez sur le bouton « Poser une question » ci-dessous.

Poser une question

*Toutes les questions sont revues et approuvées avant d'être publiées ou avant d'y répondre.
Veuillez poser des questions appropriées qui ont rapport au produit.

How do you install? Packaging was not included when I purchased. Can you provide instructions, please? Merci.

-Eric W. 7/5/2021 7h32m20 pm

Hello Eric, Please email store@uhaul.com your order # and name. Thank you

-Frank 10/5/2021 11h56m57 am

Hello Eric, Please email store@uhaul.com your order # and name. Thank you

-Frank 10/5/2021 11h57m20 am

Will this work on the Reese Q-Slot 2 bike rack? I have a 2inch receiver.

-Ken 4/4/2021 6h54m55 am

Hi Ken, Yes, this rack works with receivers from 1.25 - 2 Inches. Thank you

-Frank 7/4/2021 12h31m01 pm

Hi Ken, Yes, this rack works with receivers from 1.25 - 2 Inches. Thank you

-Frank 7/4/2021 12h31m23 pm

Can i use this for a Swagman Trailhead 3 bike rack carrier whichis attached to a 2" receiver. The receiver bolt has some threads to keep the bike rack attached to the receiver.

-Darwin Margate 9/3/2021 11h54m22 am

Hello Darwin, Yes, it fits all 2" Class III, IV & V Receiver Style Hitches Thank you

-Frank 10/3/2021 6h38m27 am

Do you have the part anti rattel reciving pin 13144 is number part

-Pierre 18/1/2021 8h55m00 pm

Hello Pierre, Yes, these are in stock. Thank you

-Frank 19/1/2021 7h21m25 am

Will this pin work with the Yakima Longarm bed extender?

-Colin C. 10/7/2020 8h25m11 am

Hello, Colin! No, this pin is not compatible with the Yakima Longarm. Thank you!

-Savannah 8/10/2020 1h31:08 PM

Will it fit the Thule Combi Transporter Hitch Cargo Box?

-David 8/7/2020 11h10m34 am

Hello, David! No, this anti-rattle lock is not compatible with the Thule cargo box. Thank you!

-Savannah 8/10/2020 1h22:33 PM

Can I use it to lock my Saris Cycle On Pro 2” hitch bike rack on my Grand Cherokee Trail hawks 2” receiver?

-Virendra 26/4/2020 10h02m36 pm

Hello, Virendra! This receiver pin can be used with your bike rack as long as the thread on the bike rack is 5/8". I hope that is helpful!

-Savannah 28/4/2020 9h21m28 am

Where is this made?

-Brian 12/4/2020 10h12m41 am

Hello, Brian! This anti-rattle receiver pin is made in China. Thanks for asking!

-Savannah 13/4/2020 9h38m22 am

Is it possible to get 3 kit but with one key set for all 3 kit .

-Luc 1/1/2020 3h04m43 pm

Hi, Luc! Unfortunately, we do not offer that option. If you were to purchase 3 of our anti-rattle receiver pins, each would be keyed differently. Thanks for asking!

-Savannah 8/1/2020 7h33m20 am

Does this work with Yakima Stickup?

-Harry 31/12/2019 1h21m55 am

Hi, Harry! No, this receiver pin is not compatible with a Yakima Stickup. Thanks for asking!

-Savannah 21/1/2020 7h19m31 am

Can I get new keys for my hitch pin?

-John 12/2/2019 9h53m18 pm

Hi, John! If you misplaced your keys, your only option would be to purchase another hitch pin completely. If you have misplaced the keys and the hitch pin is locked onto something, please contact a local locksmith to identify the best way to remove it. Thank you!

-Savannah 13/2/2019 9h21m46 am

Will it work with a stepper ?

-Tibi 9/11/2018 7h13m18 am

Hi, Tibi! The 13144 receiver pin will work with any 2" hollow shank. Thanks for asking!

-Savannah 12/6/2018 2h48:38 PM

Will this work on a Yakima four timer bike rack 2" receiver?

-Martin Horvatich 20/7/2018 6h23m03 am

Hi, Martin! No, this anti-rattle receiver pin will not work with a Yakima Four Timer. Please note that an anti-rattle hitch lock is included with the purchase of a Yakima Four Timer. Thank you!

-Savannah 8/30/2018 1h58:24 PM

Will this work on a class 2 receiver hitch I just had installed at Uhaul?

-Debbie Hoskison 13/6/2018 6h54m22 am

Hey, Debbie! The 13144 anti-rattle receiver pin will not work for a class II receiver hitch. Please consider the Dual Bent Pin Lock, which is designed for class II receiver hitches. Thank you!

-Savannah 17/7/2018 10h19m51 am

I have 2018 Tundra. Looks like it needs long than normal pin. Would this work? Or do you have other pin would work for Tundra?

-Johnny 6/6/2018 12h50m57 pm

Will this work with a Thule bike lock, given they have their own patented system? What is the bolt and thread size of this lock?

-David 12/3/2018 1h17m15 pm

Hi, David! This anti-rattle receiver pin will not work with the Thule bike lock. Thank you for asking!

-Savannah 4/12/2018 2h34:52 PM

What is the shear strength for this pin, I.E. Towing capacity? Is it rated for use with a 5000 pound trailer

-Sherman 10/5/2016 3h43m50 am

The 13144 are rated at 32,000 pounds double shear load.

-SAVANNAH 16/6/2016 10h44m24 am

Is there something we don't see in the picture because i don't see how you can put the nut inside the ball mount ? How does it install ?

-Patrick 5/4/2016 7h47m29 pm

The nut is fastened to a C channel bracket that fully fits inside the ball mount.

–Joseph 4/7/2016 3:47:35 PM

Will this pin work with threaded 1 1 /4 shank?

-David 16/3/2016 8h25m30 am

The 5/8 diameter locking hitch pin part 13144 fits all 2" receiver style hitches.

Please visit your local U-Haul hitch center for more information on anti rattle locking pins to fit your threaded 1-1/4" shank.

–Joseph 3/17/2016 3:44:19 PM

Are these available "keyed alike" for adjustable class iv hitches? I have four(4)hitch pins on my adjustable hitch so I would need four (4)

-Crawford 26/8/2015 11h17m47 am

Each 13144 lock is designed with a different key code and are not available to order "keyed alike".

–Joseph 8/28/2015 4:56:04 PM

this part will serve as antiwebbing?

-Eduardo 20/5/2015 7h27m38 am

The 13144 locking anti-rattle receiver pin helps deter theft and helps eliminate ball mount rattle and vibration.

–Joseph 5/22/2015 4:08:05 PM

Will this work on a solid shank? I am looking for a anti rattle lock for my distribution hitch that has a solid shank.

-Robert 19/5/2015 4h59m28 pm

Currently U-Haul does not offer a solid shank anti rattle device.

–Joseph 5/22/2015 4:07:52 PM

Articles recommandés

Retour
Haut de la page