Receveur de 2 po à adaptateur de 1-1/4 po - 7 po de longueur

Receveur de 2 po à adaptateur de 1-1/4 po - 7 po de longueur

Prix
30,98 $ (CAD) 30,98 $ (CAD) 30,98 $ (CAD)

Entrez votre code postal pour vérifier la disponibilité du produit dans les établissements U-Haul près de chez vous.

Veuillez prendre note

  • L'adaptateur de receveur n'est pas conçu pour le remorquage, seulement pour les vélos et les accessoires.

Description

Description du produit

Numéro de produit :
ADAPTER3

Pièce monobloc utilisée pour modifier la taille du tube de receveur de 2 po à 1 1/4 po. Longueur maximum de 7 po.

  • Capacité de charge de 3 500 lb
  • Extension à 7 po
  • Installation facile

Évaluations (0)

Questions et réponses (7)

Questions et réponses (7)

Pour voir la réponse à une question, cliquez simplement sur cette dernière. Pour publier une nouvelle question, cliquez sur le bouton « Poser une question » ci-dessous.

Poser une question

*Toutes les questions sont revues et approuvées avant d'être publiées ou avant d'y répondre.
Veuillez poser des questions appropriées qui ont rapport au produit.

Is the adapter intended to be installed permanently or can it be used only when I need a 1-1/4”, I.e., is it easily installed and removed?

-Ron H. 24/3/2024 9h40m51 am

Hi Ron! This is not a permanent install. This is secured with the pin and clip. Have a great day!

-Kristy 3/4/2024 6h50m34 pm

I have a small SUV and it's a lease vehicle,what do you recommend? I don't want to do anything that would compromise the lease contract.

-Kar 13/2/2021 3h33m43 pm

Hello Kar, I would suggest contacting your lease company before adding anything to the vehicle to be on the safe side. Thank you

-Frank 15/2/2021 6h21m02 am

I know the adapter is secured in the hitch with a 5/8" pin, but what is the pin hole size in the 1,25 " extension?

-Dan 6/2/2021 10h23m35 pm

Hello Dan, "The ADAPTER3 is secured with U-Hauls 5/8" diameter pin & clip - part 3131" Thank you

-Frank 8/2/2021 6h33m03 am

Can this go into a 1,25” receiver so the 2” Can be used on a bike rack?

-Kevin 21/10/2020 10h57m10 pm

Unfortunately no, and the part you are speaking of is no longer available. We only have the 2.14 that goes into the 2. They do not have a lip on the receiver, just a straight peace of iron.

-Frank 23/10/2020 6h12m33 am

What is the tongue weight of the adapter?

-Elisabeth 22/6/2016 1h40m12 pm

The 2" to 1-1/4" receiver adapter is rated at 350 lbs tongue weight.

-SAVANNAH 27/6/2016 8h30m43 am

What size pin does it take to connect to vehicle?

-JB 12/6/2014 5h13m40 pm

"The ADAPTER3 is secured with U-Hauls 5/8" diameter pin & clip part 3131"

–Ronald 6/13/2014 12:10:04 PM

What are the physical dimensions of this product?

-Richard 4/5/2014 6h50m13 pm

Our hitch pro writes: "The adapter is 11-5/8" in total length, 2" squared reduced to 1-1/4" squared, 7" from pin hole to pin hole and 9-1/4 from receiver pin hole to the end of the adapter."

–Ronald 5/5/2014 3:50:30 PM

Articles recommandés

Description du produit

Numéro de produit :
ADAPTER3

Pièce monobloc utilisée pour modifier la taille du tube de receveur de 2 po à 1 1/4 po. Longueur maximum de 7 po.

  • Capacité de charge de 3 500 lb
  • Extension à 7 po
  • Installation facile

Questions et réponses (7)

Pour voir la réponse à une question, cliquez simplement sur cette dernière. Pour publier une nouvelle question, cliquez sur le bouton « Poser une question » ci-dessous.

Poser une question

*Toutes les questions sont revues et approuvées avant d'être publiées ou avant d'y répondre.
Veuillez poser des questions appropriées qui ont rapport au produit.

Is the adapter intended to be installed permanently or can it be used only when I need a 1-1/4”, I.e., is it easily installed and removed?

-Ron H. 24/3/2024 9h40m51 am

Hi Ron! This is not a permanent install. This is secured with the pin and clip. Have a great day!

-Kristy 3/4/2024 6h50m34 pm

I have a small SUV and it's a lease vehicle,what do you recommend? I don't want to do anything that would compromise the lease contract.

-Kar 13/2/2021 3h33m43 pm

Hello Kar, I would suggest contacting your lease company before adding anything to the vehicle to be on the safe side. Thank you

-Frank 15/2/2021 6h21m02 am

I know the adapter is secured in the hitch with a 5/8" pin, but what is the pin hole size in the 1,25 " extension?

-Dan 6/2/2021 10h23m35 pm

Hello Dan, "The ADAPTER3 is secured with U-Hauls 5/8" diameter pin & clip - part 3131" Thank you

-Frank 8/2/2021 6h33m03 am

Can this go into a 1,25” receiver so the 2” Can be used on a bike rack?

-Kevin 21/10/2020 10h57m10 pm

Unfortunately no, and the part you are speaking of is no longer available. We only have the 2.14 that goes into the 2. They do not have a lip on the receiver, just a straight peace of iron.

-Frank 23/10/2020 6h12m33 am

What is the tongue weight of the adapter?

-Elisabeth 22/6/2016 1h40m12 pm

The 2" to 1-1/4" receiver adapter is rated at 350 lbs tongue weight.

-SAVANNAH 27/6/2016 8h30m43 am

What size pin does it take to connect to vehicle?

-JB 12/6/2014 5h13m40 pm

"The ADAPTER3 is secured with U-Hauls 5/8" diameter pin & clip part 3131"

–Ronald 6/13/2014 12:10:04 PM

What are the physical dimensions of this product?

-Richard 4/5/2014 6h50m13 pm

Our hitch pro writes: "The adapter is 11-5/8" in total length, 2" squared reduced to 1-1/4" squared, 7" from pin hole to pin hole and 9-1/4 from receiver pin hole to the end of the adapter."

–Ronald 5/5/2014 3:50:30 PM

Articles recommandés

Retour
Haut de la page