Hi Jesse! Yes, this is a Curt product and is manufactured here in the states. I hope that helps!
Boules et montages d'attache de remorque Montages de boule d'attache de remorque
Manche d’installation ajustable pour boule d’attache de remorque de 2 po (14 000lb)
Manche d’installation ajustable pour boule d’attache de remorque de 2 po (14 000lb)
Description
Description du produit
- Numéro de produit :
- 10001M
Système de boules d'attache de remorque sur manche d'installation ajustable avec boules d'attache de remorque forgées de 2 po et 2-5/16 po.
- 1 400 / 14 000
- Ensemble complet avec clavettes et goupilles
- Prêt à remorquer
- Montée maximale de 5,25 po. Chute maximale de 6 po
- La longueur de la flèche d'attache est de 10 po
Évaluations (0)
Questions et réponses (20)
Questions et réponses (20)
Description du produit
- Numéro de produit :
- 10001M
Système de boules d'attache de remorque sur manche d'installation ajustable avec boules d'attache de remorque forgées de 2 po et 2-5/16 po.
- 1 400 / 14 000
- Ensemble complet avec clavettes et goupilles
- Prêt à remorquer
- Montée maximale de 5,25 po. Chute maximale de 6 po
- La longueur de la flèche d'attache est de 10 po
Questions et réponses (20)
Description states 1,400lb tongue weight and 14,000lb trailer weight, however, the product photo (sticker) shows 400lb and 4,000lb respectively. Which is correct?
Hello Brad, Apologies, they stickered that hitch incorrectly. It is a 1400 lb. tongue weight with a 14000 lb. tow rating. Thanks for bringing it to our attention.
Are replacement ball assemblies readily available? I haven't located them on your website. Merci!
Hello Brad, Here is that link. https://www.uhaul.com/MovingSupplies/1/Hitch-Balls/ Thank you
Hello Brad, Here is that link. https://www.uhaul.com/MovingSupplies/1/Hitch-Balls/ Thank you
Hello Brad, Here is that link. https://www.uhaul.com/MovingSupplies/1/Hitch-Balls/ Thank you
If the front of the truck raise up more than my other stationary hitch do you go up on the rise or do you lower down a few holes
Hello, leveling your vehicle and trailer combination may require more than a minor ball mount adjustment, please visit your local U-Haul hitch store to go over weight distribution kit and or air suspension kit options.
what is the weight?
Hi, Jack! This ball mount weighs about 32 pounds. Thank you!
What is the tongue weight?
Hello, Jason! the tongue weight rating for the 2-5/16" ball is 1 400 pounds and 1 000 pounds for the 2" ball. I hope that is helpful!
Does this come with the balls
Hi, Garrett! Yes, this adjustable mount includes a 2" ball and a 2-5/16" ball. Thanks for asking!
I've bought this and like it, however I need the locking pins that are keyed alike and the pintle hook attachment. I'm having trouble finding them. Merci.
Hello, Bret! Please see the Curt Channel Mount Lock Set. Thank you!
What are the 2 ball ratings
Hello, Jesse! The 2" ball is rated at 10 000 pounds and the 2-5/16" ball is rated at 14 000 pounds. I hope that is helpful!
What is the distance of the pin hole on the drawbar to the end of the hitch?
Hi, Marcel! The drawbar has 2 pin holes: the length to the end of the hitch would be either 11 inches or 12 inches depending on the pin hole being used. I hope that is helpful!
WHAT SIZE IS THE PIN THAT GOES IN THE HITCH
Hey, Rodger! The pin size is 5/8 inches. I hope that is helpful!
Can I use this flipped upside down?
Hi, Adrian! The 10001M adjustable channel mount can be used in the drop or rise position. I hope that is helpful!
How long does it take for shipping
Hi, Linda! The amount of time it takes for a shipment to arrive depends on your location. Simply add this product to your cart, view your cart, check out, and enter your shipping address. Once your shipping address is entered, you will be given a shipping duration estimation. I hope that is helpful!
What is the warranty on this item?
Hey, Bob! This adjustable channel mount has a 5 year limited warranty. Thanks for your question!
What is the tongue weight this product can handle?
The 10001M tongue weight is rated at 1 400 lbs.
Hi, I have the channel with 2 5/16 ball. I need to purchase the combined 1 1/8", 2", what is the part number?
Currently U-Haul does not offer a ball size less than 2" for the Onemount system.
For more options, please see the tri-ball systems offered by U-Haul.
Can this be used as a shank for weight distribution? We are using an adapter which decreases the towing capacity. Will this compensate? Is this the same as a weight distributing shank?
The 10001M will not secure to a weight distribution head, therefore can not be used as part of a weight distribution system.
For more information on weight distribution, please visit your local U-Haul hitch center.
Is this rated for 10 000 lbs?
The 10001M One mount tow ball system is rated up to 14 000 lbs.
Thanks for asking!
is this product sold in uhaul outlets in canada? if ordered online does this product ship for free to canada?
This is an online product only. If ordered, it would "SHIP" free to Canada (ground). However, please note ... "Additional duties, charges, fees, costs and taxes, which are levied once a shipment reaches Canada. These charges are borne by you; we have no control over these charges and cannot predict what they may be. Please be advised that Customs policies vary widely from province to province. You should contact your local Canadian customs office for further information. Additionally, when ordering from U-Haul, you are considered the importer of record and must comply with all Canadian laws and regulations."
What is receiver size 2 or 2 1/2 I have a 2 1/2 class V ??
"The 10001M will fit vehicles equipped with the 2-1/2" receiver by using U-Hauls 2-1/2" to 2" adapter, part number Adapter5."
Voir la disponibilité en magasin
Manche d’installation ajustable pour boule d’attache de remorque de 2 po (14 000lb)
Manche d’installation ajustable pour boule d’attache de remorque de 2 po (14 000lb)
Les commandes Acheter en ligne, prendre en magasin sont habituellement prêtes à la cueillette dans les deux heures après leur envoi. Les commandes passées après les heures d'ouverture seront prêtes à la cueillette le lendemain. La disponibilité en magasin dépend des stocks en magasin et est normalement mise à jour toutes les deux heures. Les commandes sont conservées quatre jours après le traitement.
Is this hitch made by Curt? Where is it made? Merci.
Hi Jesse! Yes, this is a Curt product and is manufactured here in the states. I hope that helps!
Description states 1,400lb tongue weight and 14,000lb trailer weight, however, the product photo (sticker) shows 400lb and 4,000lb respectively. Which is correct?
Hello Brad, Apologies, they stickered that hitch incorrectly. It is a 1400 lb. tongue weight with a 14000 lb. tow rating. Thanks for bringing it to our attention.
Are replacement ball assemblies readily available? I haven't located them on your website. Merci!
Hello Brad, Here is that link. https://www.uhaul.com/MovingSupplies/1/Hitch-Balls/ Thank you
Hello Brad, Here is that link. https://www.uhaul.com/MovingSupplies/1/Hitch-Balls/ Thank you
Hello Brad, Here is that link. https://www.uhaul.com/MovingSupplies/1/Hitch-Balls/ Thank you
If the front of the truck raise up more than my other stationary hitch do you go up on the rise or do you lower down a few holes
Hello, leveling your vehicle and trailer combination may require more than a minor ball mount adjustment, please visit your local U-Haul hitch store to go over weight distribution kit and or air suspension kit options.
what is the weight?
Hi, Jack! This ball mount weighs about 32 pounds. Thank you!
What is the tongue weight?
Hello, Jason! the tongue weight rating for the 2-5/16" ball is 1 400 pounds and 1 000 pounds for the 2" ball. I hope that is helpful!
Does this come with the balls
Hi, Garrett! Yes, this adjustable mount includes a 2" ball and a 2-5/16" ball. Thanks for asking!
I've bought this and like it, however I need the locking pins that are keyed alike and the pintle hook attachment. I'm having trouble finding them. Merci.
Hello, Bret! Please see the Curt Channel Mount Lock Set. Thank you!
What are the 2 ball ratings
Hello, Jesse! The 2" ball is rated at 10 000 pounds and the 2-5/16" ball is rated at 14 000 pounds. I hope that is helpful!
What is the distance of the pin hole on the drawbar to the end of the hitch?
Hi, Marcel! The drawbar has 2 pin holes: the length to the end of the hitch would be either 11 inches or 12 inches depending on the pin hole being used. I hope that is helpful!
WHAT SIZE IS THE PIN THAT GOES IN THE HITCH
Hey, Rodger! The pin size is 5/8 inches. I hope that is helpful!
Can I use this flipped upside down?
Hi, Adrian! The 10001M adjustable channel mount can be used in the drop or rise position. I hope that is helpful!
How long does it take for shipping
Hi, Linda! The amount of time it takes for a shipment to arrive depends on your location. Simply add this product to your cart, view your cart, check out, and enter your shipping address. Once your shipping address is entered, you will be given a shipping duration estimation. I hope that is helpful!
What is the warranty on this item?
Hey, Bob! This adjustable channel mount has a 5 year limited warranty. Thanks for your question!
What is the tongue weight this product can handle?
The 10001M tongue weight is rated at 1 400 lbs.
Hi, I have the channel with 2 5/16 ball. I need to purchase the combined 1 1/8", 2", what is the part number?
Currently U-Haul does not offer a ball size less than 2" for the Onemount system.
For more options, please see the tri-ball systems offered by U-Haul.
Can this be used as a shank for weight distribution? We are using an adapter which decreases the towing capacity. Will this compensate? Is this the same as a weight distributing shank?
The 10001M will not secure to a weight distribution head, therefore can not be used as part of a weight distribution system.
For more information on weight distribution, please visit your local U-Haul hitch center.
Is this rated for 10 000 lbs?
The 10001M One mount tow ball system is rated up to 14 000 lbs.
Thanks for asking!
is this product sold in uhaul outlets in canada? if ordered online does this product ship for free to canada?
This is an online product only. If ordered, it would "SHIP" free to Canada (ground). However, please note ... "Additional duties, charges, fees, costs and taxes, which are levied once a shipment reaches Canada. These charges are borne by you; we have no control over these charges and cannot predict what they may be. Please be advised that Customs policies vary widely from province to province. You should contact your local Canadian customs office for further information. Additionally, when ordering from U-Haul, you are considered the importer of record and must comply with all Canadian laws and regulations."
What is receiver size 2 or 2 1/2 I have a 2 1/2 class V ??
"The 10001M will fit vehicles equipped with the 2-1/2" receiver by using U-Hauls 2-1/2" to 2" adapter, part number Adapter5."