Rallonge d'attache de remorque double

Prix annoncé :
59,95 $
Prix
49,95 $ 49,95 $ 49,95 $

Entrez votre code postal pour vérifier la disponibilité du produit dans les établissements U-Haul près de chez vous.

Description

Description du produit

Numéro de produit :
CQT7060100

La rallonge de receveur supérieure est parfaite pour les porte-vélos et les porte-bagages.

  • Receveur de remorque inférieur pour le remorquage et les accessoires
  • Poids brut de remorque de 4 000 lb et poids total de 400 lb
  • Deux receveurs de 2 po en un
  • Le revêtement haut de gamme Metal Shield noir résiste à la corrosion

Évaluations (0)

Questions et réponses (13)

Questions et réponses (13)

Pour voir la réponse à une question, cliquez simplement sur cette dernière. Pour publier une nouvelle question, cliquez sur le bouton « Poser une question » ci-dessous.

Poser une question

*Toutes les questions sont revues et approuvées avant d'être publiées ou avant d'y répondre.
Veuillez poser des questions appropriées qui ont rapport au produit.

My receiver is 1 1/4" but I have the 1 1/4" to 2" adapter. Can this be used with my adapter to hold a carrier and power wheelchair with a total weight of approx 250 lbs?

-Cheryl Potter 3/7/2021 11h14m15 am

Hello Cheryl, This extension is rated for 400lbs per each receiver slot. With this info, it seems like this should work for your situation.

-Anthony 8/7/2021 1h07m22 pm

Will the top section hold a bike rack with 4 bikes?

-Daniel Kirk 22/3/2021 11h00m57 am

Hello Danie, Yes, actually, that is why most people purchase these. Thank you

-Frank 24/3/2021 7h36m09 am

Hello Danie, Yes, actually, that is why most people purchase these. Don't forget it is an 400 lb. Tongue Weight. Thank you

-Frank 24/3/2021 7h36m45 am

Hello Danie, Yes, actually, that is why most people purchase these. Don't forget it is an 400 lb. Tongue Weight. Thank you

-Frank 24/3/2021 7h36m46 am

will the top unit hold a rack for a scooter for handicap

-Jerry Weis 17/3/2021 11h17m59 am

Hello Jerry, The tongue weight of this hitch is 400 lbs. That would apply to either receiver you are using. Thank you

-Frank 22/3/2021 8h20m54 am

Hello Jerry, The tongue weight of this hitch is 400 lbs. That would apply to either receiver you are using. Thank you

-Frank 22/3/2021 8h21m16 am

The website provides zero information on the dimensions of this extension/riser, which could be easily provided with a drawing schematic. From another Q&A, it appears the extension is 10" from pin to pin; can you verify this is the case? What is the rise of the accessory mount (pin-to-pin)? What is the clearance distance from the main pin to the back of the horizontal part of the accessory mount?

-Chris S. 17/3/2021 7h37m17 am

Hello Chris, Thanks for brining this to our attention. Here is the link to that. https://www.uhaul.com/MovingSupplies/Hitch-Balls-Mounts/Ball-Mounts/Dual-Hitch-Extension/?id=18226

-Frank 22/3/2021 9h02m55 am

can i use this upside down i need to clear my spare tire on my wrangler for my yakima full swing for my door to clear it & open.

-Felipe 6/2/2021 10h03m18 am

Hello Felipe, No, this is only designed to put things like bike racks, cargo carriers etc. on the top mount. Thank you for your question.

-Frank 8/2/2021 6h26m54 am

bonjour vous expedier pour la france merci

-laurent 26/1/2021 10h01m43 am

I am sorry, we do not..

-Frank 27/1/2021 6h20m53 am

do you have this style of an extender to fit 2 1/2" and to hold up to 12 000 enclosed trailers?

-ricky 18/12/2020 5h48m50 pm

Unfortunately no, we do not. Thank you for your question.

-Frank 21/12/2020 6h17m31 am

Unfortunately no, we do not. Thank you for your question.

-Frank 21/12/2020 6h17m53 am

Will this fit a 2inch Tow hitch

-Karthik Nageswaran 28/7/2020 7h34m48 am

Hello, Karthik! Yes, this hitch extension is compatible with 2" receiver hitches. Thank you!

-Savannah 8/3/2020 2h15:33 PM

Does it connect to a 1,25 inch receiver

-Jimmy 6/12/2018 8h31m48 pm

Hi, Jimmy! No, this dual hitch extension is designed for 2" receivers. Thanks for asking!

-Savannah 7/12/2018 7h13m07 am

what is the max waight that the upper part can hold, would it hold a scooter lift, and scooter ?

-kevin 9/4/2018 8h49m32 am

Hi, Kevin! This dual hitch extension has a gross trailer weight of 4,000 pounds and a tongue weight of 400 pounds. I hope that is helpful!

-Savannah 4/10/2018 1h20:59 PM

Hello, what Is the overall length of the extension? What are the lengths of the 2x2 part of the extension and what is the length of the 3x3 section of the hitch? How far from the ends are the center points of the linkage holes? Thanks

-Eddie 4/12/2017 1h26m06 am

Hey Eddie!

The overall length of the unit is 15"

The parts that measure 2" x 2" are 3" and 7" in length.

The parts that measure 2-1/2" x 2-1/2" are 5" and 7-3/8" in length.

The part that measures 3" x 3" is 5/8" in length.

The receiver hitch pin hole to the end of the unit measures 12-1/2".

Both extended receiver pin holes measure 2-1/2" to the end of the unit.

Thank you for your question. I hope that was helpful!

-Savannah 12/11/2017 2h45:23 PM

does it fit on 1 and a quarter inch hitch.

-Frank 27/11/2017 10h13m47 pm

Hello, Frank! No, this dual hitch extension fits 2" receiver hitches only. Thanks for asking!

-Savannah 12/11/2017 2h40:46 PM

Need a location that has the needed trailer hitch who can install today

-Kevin W Smith 8/5/2017 8h22m46 am

Hi, Kevin! Please contact your local U-Haul Hitch Center by using our Location Finder to get more information based on the installations you may need.

-Savannah 24/5/2017 10h24m55 am

Description du produit

Numéro de produit :
CQT7060100

La rallonge de receveur supérieure est parfaite pour les porte-vélos et les porte-bagages.

  • Receveur de remorque inférieur pour le remorquage et les accessoires
  • Poids brut de remorque de 4 000 lb et poids total de 400 lb
  • Deux receveurs de 2 po en un
  • Le revêtement haut de gamme Metal Shield noir résiste à la corrosion

Questions et réponses (13)

Pour voir la réponse à une question, cliquez simplement sur cette dernière. Pour publier une nouvelle question, cliquez sur le bouton « Poser une question » ci-dessous.

Poser une question

*Toutes les questions sont revues et approuvées avant d'être publiées ou avant d'y répondre.
Veuillez poser des questions appropriées qui ont rapport au produit.

My receiver is 1 1/4" but I have the 1 1/4" to 2" adapter. Can this be used with my adapter to hold a carrier and power wheelchair with a total weight of approx 250 lbs?

-Cheryl Potter 3/7/2021 11h14m15 am

Hello Cheryl, This extension is rated for 400lbs per each receiver slot. With this info, it seems like this should work for your situation.

-Anthony 8/7/2021 1h07m22 pm

Will the top section hold a bike rack with 4 bikes?

-Daniel Kirk 22/3/2021 11h00m57 am

Hello Danie, Yes, actually, that is why most people purchase these. Thank you

-Frank 24/3/2021 7h36m09 am

Hello Danie, Yes, actually, that is why most people purchase these. Don't forget it is an 400 lb. Tongue Weight. Thank you

-Frank 24/3/2021 7h36m45 am

Hello Danie, Yes, actually, that is why most people purchase these. Don't forget it is an 400 lb. Tongue Weight. Thank you

-Frank 24/3/2021 7h36m46 am

will the top unit hold a rack for a scooter for handicap

-Jerry Weis 17/3/2021 11h17m59 am

Hello Jerry, The tongue weight of this hitch is 400 lbs. That would apply to either receiver you are using. Thank you

-Frank 22/3/2021 8h20m54 am

Hello Jerry, The tongue weight of this hitch is 400 lbs. That would apply to either receiver you are using. Thank you

-Frank 22/3/2021 8h21m16 am

The website provides zero information on the dimensions of this extension/riser, which could be easily provided with a drawing schematic. From another Q&A, it appears the extension is 10" from pin to pin; can you verify this is the case? What is the rise of the accessory mount (pin-to-pin)? What is the clearance distance from the main pin to the back of the horizontal part of the accessory mount?

-Chris S. 17/3/2021 7h37m17 am

Hello Chris, Thanks for brining this to our attention. Here is the link to that. https://www.uhaul.com/MovingSupplies/Hitch-Balls-Mounts/Ball-Mounts/Dual-Hitch-Extension/?id=18226

-Frank 22/3/2021 9h02m55 am

can i use this upside down i need to clear my spare tire on my wrangler for my yakima full swing for my door to clear it & open.

-Felipe 6/2/2021 10h03m18 am

Hello Felipe, No, this is only designed to put things like bike racks, cargo carriers etc. on the top mount. Thank you for your question.

-Frank 8/2/2021 6h26m54 am

bonjour vous expedier pour la france merci

-laurent 26/1/2021 10h01m43 am

I am sorry, we do not..

-Frank 27/1/2021 6h20m53 am

do you have this style of an extender to fit 2 1/2" and to hold up to 12 000 enclosed trailers?

-ricky 18/12/2020 5h48m50 pm

Unfortunately no, we do not. Thank you for your question.

-Frank 21/12/2020 6h17m31 am

Unfortunately no, we do not. Thank you for your question.

-Frank 21/12/2020 6h17m53 am

Will this fit a 2inch Tow hitch

-Karthik Nageswaran 28/7/2020 7h34m48 am

Hello, Karthik! Yes, this hitch extension is compatible with 2" receiver hitches. Thank you!

-Savannah 8/3/2020 2h15:33 PM

Does it connect to a 1,25 inch receiver

-Jimmy 6/12/2018 8h31m48 pm

Hi, Jimmy! No, this dual hitch extension is designed for 2" receivers. Thanks for asking!

-Savannah 7/12/2018 7h13m07 am

what is the max waight that the upper part can hold, would it hold a scooter lift, and scooter ?

-kevin 9/4/2018 8h49m32 am

Hi, Kevin! This dual hitch extension has a gross trailer weight of 4,000 pounds and a tongue weight of 400 pounds. I hope that is helpful!

-Savannah 4/10/2018 1h20:59 PM

Hello, what Is the overall length of the extension? What are the lengths of the 2x2 part of the extension and what is the length of the 3x3 section of the hitch? How far from the ends are the center points of the linkage holes? Thanks

-Eddie 4/12/2017 1h26m06 am

Hey Eddie!

The overall length of the unit is 15"

The parts that measure 2" x 2" are 3" and 7" in length.

The parts that measure 2-1/2" x 2-1/2" are 5" and 7-3/8" in length.

The part that measures 3" x 3" is 5/8" in length.

The receiver hitch pin hole to the end of the unit measures 12-1/2".

Both extended receiver pin holes measure 2-1/2" to the end of the unit.

Thank you for your question. I hope that was helpful!

-Savannah 12/11/2017 2h45:23 PM

does it fit on 1 and a quarter inch hitch.

-Frank 27/11/2017 10h13m47 pm

Hello, Frank! No, this dual hitch extension fits 2" receiver hitches only. Thanks for asking!

-Savannah 12/11/2017 2h40:46 PM

Need a location that has the needed trailer hitch who can install today

-Kevin W Smith 8/5/2017 8h22m46 am

Hi, Kevin! Please contact your local U-Haul Hitch Center by using our Location Finder to get more information based on the installations you may need.

-Savannah 24/5/2017 10h24m55 am

Articles recommandés

Retour
Haut de la page