Si pris en magasin, plus bas prix pour certains produits 
Expédition gratuite des commandes de plus de 50 $ Hi Norma. Not for the 2" to 2". Sorry about that.
Accessoires de déménagement Boules et montages d'attache de remorque Montages de boule d'attache de remorque
Extension de receveur de 2 à 2 pi – rallonge de 8 pi
Extension de receveur de 2 à 2 pi – rallonge de 8 pi
Description
Description du produit
- Numéro de produit :
- ADAPTER6
Extension de receveur de 2 po à 2 po - rallonge de 8 po.
- Capacité de charge de 3,500 lb
- 350 lb de charge pour le timon
Besoin d'aide pour l'attache de remorque ou le remorquage?
Évaluations (0)
Questions et réponses (10)
Questions et réponses (10)
Description du produit
- Numéro de produit :
- ADAPTER6
Extension de receveur de 2 po à 2 po - rallonge de 8 po.
- Capacité de charge de 3,500 lb
- 350 lb de charge pour le timon
Besoin d'aide pour l'attache de remorque ou le remorquage?
Questions et réponses (10)
Who is the manufacture of the u-haul hitch extender. Thanks
This product is no longer available.
This product is no longer available.
This product is no longer available.
Does this come with an Anti-wobble device to ensure a tight fit with my existing hitch?
Hi, Steve! No, the extension does not include a pin, but you can purchase an Anti-Rattle Receiver Pin to go along with your receiver extension. I hope that is helpful!
Hey what’s up, would I be able to tow my 3-seater seadoo with this extension?
Hey, Eddie! This adapter is rated for 3,500 pounds maximum trailer weight and 350 pounds maximum tongue weight. Please take that into consideration when deciding if this is the right adapter for your 3-seater. Thank you!
Since it says the tow capacity is cut by 50 %, does that mean when it says towing capacity is 3500 its only actually half that?
Hello, Donna! The Adapter6 is rated at 3500 pounds weight carrying and 350 pounds tongue weight. I hope that is helpful!
Will this fit a 2010 Chevy traverse
The ADAPTER6 will fit to a Chevy Traverse equipped with a 2" receiver hitch.
What is the tongue weight of this product? Thanks!
The Adapter6 is rated for 350 lbs tongue weight
Is this extender able to hold a bike rack? If so what is the max tongue capacity?
The Adapter6 features a max tongue weight of 350lbs and will receive bike racks equipped with a 2" shank.
Hello, Is the overall length of the extension? What are the lengths of the 2x2 part of the extension and what is the length of the 3x3 section of the hitch? How far from the ends are the center points of the linkage holes? Thanks
Hi Jeff, the Overall length of this Receiver Extension is 13".
The 2X2 part of the extension has a shank length of 6-1/2" and from the pin hole to the end of shank measures 2-1/2".
The 3X3 part of receiver has a length of 6-1/2" and from the pin hole to end of the receiver measures 2-1/2".
The measurement form pin hole to pin hole is 8". I hope that answers your question. Thank you!
have a jeep liberty with spare tire mounted on rear what length extender woud i need
"U-Haul 2" receiver extensions come in 8", 14" and 18" extenders. If your hitch accessory needs to extend past a rear mounted spare tire, please measure from the receiver hitch pin hole to the rear edge of the spare tire for an accurate selection. Please note, using a hitch extender reduces the receiver hitch rating by 50%"
Voir la disponibilité en magasin
Extension de receveur de 2 à 2 pi – rallonge de 8 pi
Extension de receveur de 2 à 2 pi – rallonge de 8 pi
Les commandes Acheter en ligne, prendre en magasin sont habituellement prêtes à la cueillette dans les deux heures après leur envoi. Les commandes passées après les heures d'ouverture seront prêtes à la cueillette le lendemain. La disponibilité en magasin dépend des stocks en magasin et est normalement mise à jour toutes les deux heures. Les commandes sont conservées quatre jours après le traitement.
Is there a receiver extension shorter than the overall size of the 13 inch extension?
Hi Norma. Not for the 2" to 2". Sorry about that.
Who is the manufacture of the u-haul hitch extender. Thanks
This product is no longer available.
This product is no longer available.
This product is no longer available.
Does this come with an Anti-wobble device to ensure a tight fit with my existing hitch?
Hi, Steve! No, the extension does not include a pin, but you can purchase an Anti-Rattle Receiver Pin to go along with your receiver extension. I hope that is helpful!
Hey what’s up, would I be able to tow my 3-seater seadoo with this extension?
Hey, Eddie! This adapter is rated for 3,500 pounds maximum trailer weight and 350 pounds maximum tongue weight. Please take that into consideration when deciding if this is the right adapter for your 3-seater. Thank you!
Since it says the tow capacity is cut by 50 %, does that mean when it says towing capacity is 3500 its only actually half that?
Hello, Donna! The Adapter6 is rated at 3500 pounds weight carrying and 350 pounds tongue weight. I hope that is helpful!
Will this fit a 2010 Chevy traverse
The ADAPTER6 will fit to a Chevy Traverse equipped with a 2" receiver hitch.
What is the tongue weight of this product? Thanks!
The Adapter6 is rated for 350 lbs tongue weight
Is this extender able to hold a bike rack? If so what is the max tongue capacity?
The Adapter6 features a max tongue weight of 350lbs and will receive bike racks equipped with a 2" shank.
Hello, Is the overall length of the extension? What are the lengths of the 2x2 part of the extension and what is the length of the 3x3 section of the hitch? How far from the ends are the center points of the linkage holes? Thanks
Hi Jeff, the Overall length of this Receiver Extension is 13".
The 2X2 part of the extension has a shank length of 6-1/2" and from the pin hole to the end of shank measures 2-1/2".
The 3X3 part of receiver has a length of 6-1/2" and from the pin hole to end of the receiver measures 2-1/2".
The measurement form pin hole to pin hole is 8". I hope that answers your question. Thank you!
have a jeep liberty with spare tire mounted on rear what length extender woud i need
"U-Haul 2" receiver extensions come in 8", 14" and 18" extenders. If your hitch accessory needs to extend past a rear mounted spare tire, please measure from the receiver hitch pin hole to the rear edge of the spare tire for an accurate selection. Please note, using a hitch extender reduces the receiver hitch rating by 50%"