CQT118413 à 4 prises plates avec convertisseur à faisceau pour feux arrière de style usine
CQT118413 à 4 prises plates avec convertisseur à faisceau pour feux arrière de style usine
Description
Description du produit
Numéro de produit :
CQT118413
Les connecteurs T-One permettent une connexion rapide sans que vous n'ayez à épisser, couper ou coller à l'aide de ruban adhésif le câblage de votre véhicule. L'installation est simple et rapide, et aucun outil n'est nécessaire! Ce connecteur convient aux véhicules et modèles suivants : Hyundai 2006 à 2010 Azera (tous les modèles) et Toyota 2001 à 2007 Highlander (tous sauf hybride).
Numéro de produit du support de fixation à 4 prises plates : CQT118144
Numéro de produit de l'ajout 5 à voies : 13496
Numéro de produit de l'ajout 6 à voies : 13320
Numéro de produit de l'ajout 7 à voies : 47185
Emplacement du connecteur : à l'intérieur de l'espace de chargement
Numéro de produit du support à 6 voies : 13303
Évaluations (0)
Questions et réponses (6)
Questions et réponses (6)
Do I need the power fuse lead and where do I pull the power wire to connect the fuse power cord I connected to battery and brought it back to the electrical converter box area but just unsure if I cut the brown wire and connect or it's another wire I have a 2006 Highlander.. When I bought my hitch it added the power fuse wire to battery. Hopkins OEM Grade Power Wire with Fuse Holder I already hooked everything up my trailer lights all works but uhaul added this fuse thing to my cart like I needed it so the CQT118413 4-Flat with Factory Style Taillight Harness Converter is hooked up without the fuse wire and all works fine but I'm unsure what wire to cut into to put the fuse wire from battery please help.
Hey Chris! Please call your local U-Haul Center or give us a call at 866-277-6855 and we can help.
Which trailer light adapter is needed for a 2004 Jeep Liberty
Hello, Chris! For a 2004 Jeep Liberty, please use the vehicle-specific taillight harness CQT118524. Thank you!
I have a 2007 Highlander and my wire harness is bad I need a new one cuz how much is it to install it
Hi, Jacob! Please contact your local U-Haul Hitch Center to learn more about installation pricing. Thank you!
Will this work through the vehicle wiring harness without need for lead to battery?? I’m assuming that this product will convet brake and taillights to 2 wires on my 07 Highlander?
Hey, Mark! This taillight wiring harness converts your 3-wire taillight system to a 2-wire system without a lead from the battery. I hope that is helpful!
We have a 2006 Toyota Highlander and had a U-Haul hitch and wiring installed in 2007. It has worked well until recently, when the right side lighting quite. Upon inspection, the trailer light power module has a small melted area on the side where the right side wiring is. I imagine this is the problem. The original power module and wiring are the generic version, with clip-ons to the appropriate vehicle wires (brakes, taillights, blinkers). It would look like this quick connect would be a great replacement for the original. However, the wiring in our Highlander has only one large plug rather than the four plugs shown in the picture of the U-Haul quick connector (two large and two small). Is the picture accurate, or will this quick connect work with just one large plug?
Hey, Don! There are two types of 4-flat plug-and-play style trailer wiring harnesses that will fit your vehicle:
CQT118413, which is a T-connector that uses the taillight connectors.
CQT118248, which is a single plug harness that plugs into the vehicle tow harness located in the cargo area.
I hope that is helpful!
Do I have to buy a T-connector in addition to this?
CQT118413 includes the connector assembly, converter and 4-flat plug, no additional T-connectors are needed.
Les connecteurs T-One permettent une connexion rapide sans que vous n'ayez à épisser, couper ou coller à l'aide de ruban adhésif le câblage de votre véhicule. L'installation est simple et rapide, et aucun outil n'est nécessaire! Ce connecteur convient aux véhicules et modèles suivants : Hyundai 2006 à 2010 Azera (tous les modèles) et Toyota 2001 à 2007 Highlander (tous sauf hybride).
Numéro de produit du support de fixation à 4 prises plates : CQT118144
Numéro de produit de l'ajout 5 à voies : 13496
Numéro de produit de l'ajout 6 à voies : 13320
Numéro de produit de l'ajout 7 à voies : 47185
Emplacement du connecteur : à l'intérieur de l'espace de chargement
Numéro de produit du support à 6 voies : 13303
Questions et réponses (6)
Do I need the power fuse lead and where do I pull the power wire to connect the fuse power cord I connected to battery and brought it back to the electrical converter box area but just unsure if I cut the brown wire and connect or it's another wire I have a 2006 Highlander.. When I bought my hitch it added the power fuse wire to battery. Hopkins OEM Grade Power Wire with Fuse Holder I already hooked everything up my trailer lights all works but uhaul added this fuse thing to my cart like I needed it so the CQT118413 4-Flat with Factory Style Taillight Harness Converter is hooked up without the fuse wire and all works fine but I'm unsure what wire to cut into to put the fuse wire from battery please help.
Hey Chris! Please call your local U-Haul Center or give us a call at 866-277-6855 and we can help.
Which trailer light adapter is needed for a 2004 Jeep Liberty
Hello, Chris! For a 2004 Jeep Liberty, please use the vehicle-specific taillight harness CQT118524. Thank you!
I have a 2007 Highlander and my wire harness is bad I need a new one cuz how much is it to install it
Hi, Jacob! Please contact your local U-Haul Hitch Center to learn more about installation pricing. Thank you!
Will this work through the vehicle wiring harness without need for lead to battery?? I’m assuming that this product will convet brake and taillights to 2 wires on my 07 Highlander?
Hey, Mark! This taillight wiring harness converts your 3-wire taillight system to a 2-wire system without a lead from the battery. I hope that is helpful!
We have a 2006 Toyota Highlander and had a U-Haul hitch and wiring installed in 2007. It has worked well until recently, when the right side lighting quite. Upon inspection, the trailer light power module has a small melted area on the side where the right side wiring is. I imagine this is the problem. The original power module and wiring are the generic version, with clip-ons to the appropriate vehicle wires (brakes, taillights, blinkers). It would look like this quick connect would be a great replacement for the original. However, the wiring in our Highlander has only one large plug rather than the four plugs shown in the picture of the U-Haul quick connector (two large and two small). Is the picture accurate, or will this quick connect work with just one large plug?
Hey, Don! There are two types of 4-flat plug-and-play style trailer wiring harnesses that will fit your vehicle:
CQT118413, which is a T-connector that uses the taillight connectors.
CQT118248, which is a single plug harness that plugs into the vehicle tow harness located in the cargo area.
I hope that is helpful!
Do I have to buy a T-connector in addition to this?
CQT118413 includes the connector assembly, converter and 4-flat plug, no additional T-connectors are needed.
Free standard shipping is available on qualifying orders $50 (USD) or more when shipped within the contiguous U.S. or on orders $100 (CAD) or more when shipped within Canada.
Livraison le jour même : Notre réseau de sympathiques livreurs passera chercher les produits admissibles auprès de votre magasin U-Haul local et les livreront sur le pas de votre porte.* Ce service est disponible dans la plupart des régions pour nos produits les plus populaires. Choisissez la livraison le jour même pendant l'achat pou vérifier la disponibilité dans votre région.
*Les frais de livraison seront calculés au moment du paiement.
Free standard shipping is available on qualifying orders $50 (USD) or more when shipped within the contiguous U.S. or on orders $100 (CAD) or more when shipped within Canada.
Économies avec prise en magasin! En venant vous-même chercher votre commande en magasin au lieu de la faire expédier chez vous, vous aurez peut-être droit à des économies supplémentaires sur certains produits.
Livraison le jour même : Notre réseau de sympathiques livreurs passera chercher les produits admissibles auprès de votre magasin U-Haul local et les livreront sur le pas de votre porte.* Ce service est disponible dans la plupart des régions pour nos produits les plus populaires. Choisissez la livraison le jour même pendant l'achat pou vérifier la disponibilité dans votre région.
*Les frais de livraison seront calculés au moment du paiement.
Expédition gratuite des commandes de plus de 50 $ 
Si pris en magasin, plus bas prix pour certains produits 
Do I need the power fuse lead and where do I pull the power wire to connect the fuse power cord I connected to battery and brought it back to the electrical converter box area but just unsure if I cut the brown wire and connect or it's another wire I have a 2006 Highlander.. When I bought my hitch it added the power fuse wire to battery. Hopkins OEM Grade Power Wire with Fuse Holder I already hooked everything up my trailer lights all works but uhaul added this fuse thing to my cart like I needed it so the CQT118413 4-Flat with Factory Style Taillight Harness Converter is hooked up without the fuse wire and all works fine but I'm unsure what wire to cut into to put the fuse wire from battery please help.
Hey Chris! Please call your local U-Haul Center or give us a call at 866-277-6855 and we can help.
Which trailer light adapter is needed for a 2004 Jeep Liberty
Hello, Chris! For a 2004 Jeep Liberty, please use the vehicle-specific taillight harness CQT118524. Thank you!
I have a 2007 Highlander and my wire harness is bad I need a new one cuz how much is it to install it
Hi, Jacob! Please contact your local U-Haul Hitch Center to learn more about installation pricing. Thank you!
Will this work through the vehicle wiring harness without need for lead to battery?? I’m assuming that this product will convet brake and taillights to 2 wires on my 07 Highlander?
Hey, Mark! This taillight wiring harness converts your 3-wire taillight system to a 2-wire system without a lead from the battery. I hope that is helpful!
We have a 2006 Toyota Highlander and had a U-Haul hitch and wiring installed in 2007. It has worked well until recently, when the right side lighting quite. Upon inspection, the trailer light power module has a small melted area on the side where the right side wiring is. I imagine this is the problem. The original power module and wiring are the generic version, with clip-ons to the appropriate vehicle wires (brakes, taillights, blinkers). It would look like this quick connect would be a great replacement for the original. However, the wiring in our Highlander has only one large plug rather than the four plugs shown in the picture of the U-Haul quick connector (two large and two small). Is the picture accurate, or will this quick connect work with just one large plug?
Hey, Don! There are two types of 4-flat plug-and-play style trailer wiring harnesses that will fit your vehicle:
- CQT118413, which is a T-connector that uses the taillight connectors.
- CQT118248, which is a single plug harness that plugs into the vehicle tow harness located in the cargo area.
I hope that is helpful!Do I have to buy a T-connector in addition to this?
CQT118413 includes the connector assembly, converter and 4-flat plug, no additional T-connectors are needed.